以南钢开式水冷模铸机为研究对象，建立了型腔内钢液三维非稳态流动、传热和液面波动的数学模型，研究了浇注过程中钢液的流动特征、温度分布以及注流卷吸气体的运动规律。结果表明：浇注过程中，在“气体卷吸”作用下，型腔内钢液的流动存在显著差异，浇注前期表现为上升流呈多个大小不一的涡旋流，浇注后期则呈典型的逆时针涡旋流，并充满整个模腔。在该流动行为影响下，型腔内钢液温度场表现为中心低四周高的系列等温带，钢液表面水平流速随液面高度的上升而增加，在液面高度为3.1 m时达到最大表面流速0.6 m/s ，此时液面波动大，易发生卷渣和钢液二次氧化。
In order to investigate the fluid flow,heat transfer and bubble entrainment with steel stream in the open water-cooling mold at different time,a three-dimensional unsteady model of liquid steel flow,surface fluctuation and temperature distribution in the mold was developed based on the open water-cooling mold casting machine of Nanj ing Iron and Steel Co.,Ltd.The results show that the bubble entrainment has an important effect on liquid steel flow pattern in mold.The upward liquid steel flow is formed with several vortex zones of various sizes at the early teeming stage,while flow vortex is counterclockwise in whole mold under bubble flotation flow at the later teeming stage.The temperature field of liquid steel in mold presents an isothermal area whose temperature is low-er in center and higher around the center.Liquid steel surface horizontal velocity increases with increasing the sur-face height.As the height of liquid steel surface rises up,the surface velocity of liquid steel increases,and the maximum value is 0.6 m/s at the height of 3.1 m.It is easy to cause slag entrapment and re-oxidation because of the large fluctuation of liquid surface.
参考文献
| [1] | 张强;许少普;李忠波;唐郑磊;高照海;杨阳.Q345E-Z35特厚板的研发[J].钢铁研究学报,2015(11):73-76. |
| [2] | 李俊涛;燕平;吴剑涛;董建新;王磊;曾强.新型高强抗热腐蚀定向凝固高温合金DZ409[J].钢铁研究学报,2016(2):38-44. |
| [3] | 陈元元;刘喜海;李宝宽.电渣重熔钢锭凝固过程数学模拟软件[J].钢铁研究学报,2005(6):30-33,42. |
| [4] | 刘双;贺铸;蔡辉;王强;李宝宽.不同工艺参数下电渣重熔过程的数值模拟[J].钢铁研究学报,2015(10):26-33. |
| [5] | 孙海波;李烈军;程晓文;丘文生;曾令宇;张家泉.连铸凝固传热时液相有效导热系数的定量化[J].钢铁研究学报,2015(5):35-41. |
| [6] | WENSHENG LI;HOUFA SHEN;XIONG ZHANG.Modeling of Species Transport and Macrosegregation in Heavy Steel Ingots[J].Metallurgical and Materials Transactions, B. Process metallurgy and materials processing science,20142(2):464-471. |
| [7] | Wen-sheng Li;Hou-fa Shen;Bai-cheng Liu.Numerical simulation of macrosegregation in steel ingots using a two-phase model[J].矿物冶金与材料学报,2012(09):787-794. |
| [8] | 张东伟;苑晓冬;李胜利;陶军;艾新港.水冷工艺生产巨型扁钢锭的模拟研究[J].铸造技术,2011(5):711-713. |
| [9] | 徐亚东;沈厚发;雷丙旺;胡永平;韩非.基于凝固模拟的钢锭模锥度设计与验证[J].铸造,2014(3):249-251,256. |
| [10] | 杨薇;赵俊学;宋书雅;仇圣桃.大型钢锭充型和凝固过程的数值模拟[J].特种铸造及有色合金,2014(2):149-152. |
| [11] | W. ZHAO;J. LI;R.P. LIU.ANSYS-Based Simulation and Optimization on Temperature Field of Amorphous Ingot Made by Water Quenching[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,20145(5):2371-2375. |
| [12] | 杨景军;庞瑞朋;成国光.水冷模铸下430铁素体不锈钢温度场和流场的数值模拟[J].材料热处理学报,2014(5):207-213. |
| [13] | 房金乐;支旭波.大型钢锭铸造充型过程的数值模拟[J].重型机械,2014(6):53-56. |
| [14] | 陈家祥.铸钢钢流卷吸空气量的研究[J].化工冶金,1985(04):132-138. |
| [15] | 吴伟.连铸过程中注流吸氧速率估算[J].本溪冶金高等专科学校学报,2001(02):5-7. |
| [16] | 罗志国;倪冰.利用FLUENT模拟连铸结晶器内的气液两相流动[J].工业加热,2008(1):6-7. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%