带钢板形和横向厚度差是冷轧硅钢产品的关键质量指标。针对冷轧硅钢板形与横向厚度控制进行了研究分析，描述了冷轧硅钢板形和横向厚度存在的缺陷以及两者的相关性，指出了热轧原料断面厚度的不均匀性是硅钢板形与横向厚度控制存在的矛盾点，并表明了良好的热轧原料轮廓尺寸是保证冷轧硅钢板形与横向厚度协调控制的关键因素。
The shape and transverse thickness difference is a key quality index for cold rolled silicon steel products. The control of the shape and transverse thickness difference of cold rolled silicon steel were analyzed,the defects of the shape and the transverse thickness difference were described,that the section thickness inhomogeneity of hot raw materials is the contradictions in the control process of the shape and transverse thickness of silicon steel were pointed out,and it shows that a good hot material profile size is the key factor to ensure the coordination control of shape and transverse thickness difference of cold-rolled silicon steel.
参考文献
| [1] | 李广林,马家骥,王路兵,等 .UCMW 轧机横向厚差控制策略的研究与优化[J].钢铁研究学报,2012,24(1):52.,2012. |
| [2] | 徐鹤贤.冷轧钢带板形及其控制工艺探讨 [J].特钢技术, 2000(2):14.,2000. |
| [3] | 周晓敏,张清东,王长松,吴平.UCMW轧机的边缘降自动控制系统及其优化[J].钢铁,2007(09):56-59. |
| [4] | 朱简如,徐耀寰.边缘降控制技术的应用[J].宝钢技术,2001(05):10-13. |
| [5] | 周贺贺,曹余良,王攀峰,孟令东.低硅钢冶炼过程硅质量分数控制[J].中国冶金,2013(05):41-43,47. |
| [6] | 孙建华,沈新玉,严珺洁,王玕.硅钢轧辊消耗分析与改进策略[J].中国冶金,2012(03):18-21. |
| [7] | 许健勇.薄板冷轧厚度与板形高精度控制技术[J].钢铁,2002(01):73-77,18. |
| [8] | 张凤泉,刘本仁.提高冷轧硅钢片成材率板形质量和横向厚度精度的分析[J].钢铁研究,2005(04):40-44,58. |
| [9] | 李俊洪,戚向东,连家创,刘献东,姜正连.热轧带钢局部高点对冷轧带钢板形的影响[J].钢铁,2004(06):47-50. |
| [10] | 李广林,周晓琦,范正军,牛枫,侍爱臣,赵运攀,王路兵.冷轧带钢边部折皱缺陷的成因分析与控制措施[J].轧钢,2013(04):55-58. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%