通过对含钛球团矿护炉期间生产实践的分析和研究，安钢7号高炉确定了生铁含钛与钛负荷、生铁含硅的关系。对于钛负荷和硅的综合优化控制，应该是先确定对钛影响较大的钛负荷，再调整对钛影响较小的硅，来获得适宜的钛负荷。含钛炉料的护炉效果是建立在加强冷却强度和控制冶炼强度等护炉技术措施的基础上的，并且它是一个长期和不断调整的过程。
According to the practice and study on the furnace maintenance of titanium‐bearing pellets .It was con‐firmed in No .7 BF that the relationship between w[Ti] ,titanium load and w[Si] in hot metal .To obtaining the suitable titanium load and integrated optimal control of w[Si] ,it should be on the first hand to determine the amount of titani‐um load for its bigger impact on w[Ti] ,and then adjusting w[Si] for its smaller impact .The effect on furnace mainte‐nance is based on technologies such as increasing the cooling intensity and controlling the smelting intensity ,w hich is a long period of effort with continuous adjustment .
参考文献
| [1] | 徐万仁,朱仁良,张龙来,张永忠.宝钢2号高炉炉缸侧壁侵蚀原因及控制实践[J].钢铁,2007(01):8-11,16. |
| [2] | 雷有高,魏功亮,赵仕清.重钢5号高炉钒钛矿护炉冶炼实践[J].炼铁,2007(01):20-22. |
| [3] | 刘洪新,赵军,崔文月.根据钛平衡计算分析含钛炉料护炉的控制思路[J].炼铁,2013(02):20-23. |
| [4] | 李胜杰,张希刚,赵恒山,王薇.安钢7#高炉含钛炉料护炉实践与研究[J].河北冶金,2014(04):8-11. |
| [5] | 丁跃华,李新生.碳饱和熔铁中Ti化合物析出规律的研究[J].钢铁钒钛,2009(02):22-27. |
| [6] | 曲彦平,杜鹤桂.钛在铁水中的行为[J].沈阳工业大学学报,2000(03):190-192. |
| [7] | 李新生,丁跃华,华一新.碳饱和铁液中钛溶解度测定探讨[J].南方金属,2006(02):17-20. |
| [8] | 马金芳,贾国利.关于高炉低硅冶炼的探讨[J].中国冶金,2008(09):31-35. |
| [9] | 蔡皓宇,程树森,马金芳.高炉钛矿护炉规律的研究[J].钢铁,2012(11):16-20,26. |
| [10] | 李永全,Yun Li,R J Fruehan.高炉钛矿护炉的机理研究[J].宝钢技术,2002(01):12-16. |
| [11] | 赵莉琼,张卫东.含钛矿石的护炉作用及其局限性[J].冶金丛刊,2002(05):4-6. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%