从精准设计的角度出发，依据产品大纲，建立了棒线材生产流程的转炉－连铸－热轧产能匹配多目标数学模型，以工序间的实际产能与目标产能差距小且各工序的平均有效作业率高为优化目标。通过改进的分层序列法对模型进行求解，并对其进行产能核算，以求得合理的结果。基于某新建钢铁厂的产品大纲，利用此模型对该厂的棒线材生产流程转炉—热轧区段的产能匹配进行了研究，并给出了优化的设计方案。
From the perspective of precise design ,a multi‐objective mathematical model of rod and wire production process of converter‐continuous casting‐hot rolling was established according to the product outline ,aiming at narro‐wing the gap between the actual productivity and the target productivity ,and increasing the average effective opera‐tion efficiency .The model was solved by improved hierarchical sequence method ,and the capacity was calculate in order to get the reasonable results .Based on the product outline of a newly‐built steel plant ,the capacity matching of rod and wire production process of converter‐hot rolling section in the plant was studied using this model ,and the optimized design scheme was given .
参考文献
| [1] | 殷瑞钰.关于新一代钢铁制造流程的命题[J].上海金属,2006(04):1-5,13. |
| [2] | 殷瑞钰.关于钢铁制造流程的研究[J].金属学报,2007(11):1121-1128. |
| [3] | 王三忠,刘海强,王新志,宋素格.现代全连铸生产模式下的炉机匹配工艺优化[J].连铸,2011(02):4-7,11. |
| [4] | 尹佳,刘青,田新中,胡黎宁.邢钢BOF-LF-CCM工序产能匹配研究[J].炼钢,2008(03):21-24. |
| [5] | 穆衍清,尹佳,谢飞鸣,王宝,王彬,王闯,刘青,卢新春,张立强.特殊钢厂炉机匹配研究[J].北京科技大学学报,2013(01):126-133. |
| [6] | 张龙强,田乃媛.基于炉机匹配的新一代大型钢厂配置研究[J].冶金自动化,2008(03):34-38. |
| [7] | Wang Bin,王彬,刘青,Liu Qing,Mu Yanqing,穆衍清,Wang Bao,王宝,Ju Qiping,居琪萍,Xie Feiming,谢飞鸣,Zhang Liqiang,张立强,白素宏,Bai Suhong,Wang Gang,王刚.长材型特殊钢厂产品结构与炉机匹配[C].2012年全国炼钢-连铸生产技术会论文集,2012:567-575,579. |
| [8] | 刘青,殷瑞钰.转炉-棒/线材生产流程的优化配置[J].钢铁,2003(04):17-20. |
| [9] | 贺东风,芦永明,徐安军,田乃媛.应用精准设计原理的全板带型钢厂炉机匹配模型[J].重庆大学学报,2011(03):75-81. |
| [10] | 芦永明,田乃媛,徐安军,贺东风.棒线材生产流程炉机匹配模型的建立[J].冶金自动化,2009(z2):832-835. |
| [11] | 于港 .基于精准设计的炼钢-连铸-热轧区段工序配置与生产调度[D].北京:北京科技大学,2010. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%