为研究玻璃纤维(GF)表面纳米SiO2改性对GF增强树脂基复合材料力学性能的影响,利用真空辅助模压(VAMP)工艺制备了不同含量的纳米SiO2表面改性GF增强聚环状对苯二甲酸丁二醇酯(PCBT)复合材料.分析了GF表面改性对GF/PCBT复合材料力学性能的影响,研究了纤维表面改性对GF/PCBT复合材料抗湿热老化性能的影响规律.纤维拔出试验结果表明:经表面处理的GF/PCBT复合材料的界面剪切强度提高了1.16倍;采用含量为0.5wt％和2wt％(与树脂质量比)的纳米SiO2处理GF表面后,复合材料的三点弯曲强度分别提高1.5倍和1.67倍,弯曲模量分别提高1.03倍和1.17倍.SEM结果显示:当纳米SiO2用量为2wt％时,破坏后的纤维表面被树脂完全覆盖,树脂与纤维粘结良好.在湿热条件下,由于纳米SiO2颗粒的存在,水分子很难通过界面相扩散到改性后的材料内部,其抗湿热性能提高.
参考文献
| [1] | Z.A. Mohd Ishak;Y.W. Leong;M. Steeg;J. Karger-Kocsis.Mechanical properties of woven glass fabric reinforced in situ polymerized poly(butylene terephthalate) composites[J].Composites science and technology,20073/4(3/4):390-398. |
| [2] | Amiya R.Tripathy;Wenjie Chen;Stephen N.Kukureka;William J.MacKnight.Novel poly(butylene terephthalate)/poly(vinyl butyral)blends prepared by in situ polymerization of cyclic poly(butylene terephthalate)oligomers[J].Polymer: The International Journal for the Science and Technology of Polymers,20036(6):1835-1842. |
| [3] | Zhenyu Jiang;Suchart Siengchin;Li-Min Zhou.Poly (butylene terephthalate)/silica nanocomposites prepared from cyclic butylene terephthalate[J].Composites, Part A. Applied science and manufacturing,20093(3):273-278. |
| [4] | J. Baets;A. Godara;J. Devaux.Toughening of polymerized cyclic butylene terephthalate with carbon nanotubes for use in composites[J].Composites. Part A, Applied science and manufacturing,200811(11):1756-1761. |
| [5] | Paola Fabbri;Elena Bassoli;Silvia Bittolo Bon;Luca Valentini.Preparation and characterization of poly (butylene terephthalate)/graphene composites by in-situ polymerization of cyclic butylene terephthalate[J].Polymer: The International Journal for the Science and Technology of Polymers,20124(4):897-902. |
| [6] | P.A. Sreekumar;Selvin P. Thomas;Jean marc Saiter.Effect of fiber surface modification on the mechanical and water absorption characteristics of sisal/polyester composites fabricated by resin transfer molding[J].Composites, Part A. Applied science and manufacturing,200911(11):1777-1784. |
| [7] | Hongshuai Lei;Zhenqing Wang;Bo Zhou;Liyong Tong;Xiaoqiang Wang.Simulation and analysis of shape memory alloy fiber reinforced composite based on cohesive zone model[J].Materials & design,2012Sep.(Sep.):138-147. |
| [8] | 张翼鹏;颜春;阮春寅;丁江平;刘俊龙;范欣愉.原位聚合法制备连续玻璃纤维增强PCBT复合材料及其性能[J].复合材料学报,2012(4):29-35. |
| [9] | Hilde Parton;Joris Baets;Ignaas Verpoest;Bart Goderis;Jacques Devaux;Pascale Lipnik.Properties of poly(butylene terephthatlate) polymerized from cyclic oligomers and its composites[J].Polymer: The International Journal for the Science and Technology of Polymers,200523(23):9871-9880. |
| [10] | Y.I. Tsai;E.J. Bosze;E. Barjasteh;S.R. Nutt.Influence Of Hygrothermal Environment On Thermal And Mechanical Properties Of Carbon Fiber/fiberglass Hybrid Composites[J].Composites science and technology,20093/4(3/4):432-437. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%