为了研究含螺栓复合材料层压板连接接头的层间应力分布规律,提出了采用填充孔形式和虚拟界面层方法求解层间应力,并建立了三维有限元模型对受面内压缩载荷的螺栓夹持填充孔层压板进行分析.结果表明:层压板层间应力集中不仅发生在孔边,还会在螺栓头边缘附近出现,且夹持力越大螺栓头边缘附近的层间应力集中越严重;合理的螺栓夹持力能改善孔边应力状态,提高孔边抵抗分层的能力,但无法改善螺栓头边缘附近的层间剪切应力集中状态.因此,在进行含螺栓夹持的层压板机械连接结构孔边层间强度设计时,也要考虑螺栓头边缘的层间剪切应力集中问题,以提高复合材料结构的安全性.
参考文献
| [1] | R. Esquej;L Castejon;M. Lizaranzu;M. Carrera;A. Miravete;R. Miralbes.A new finite element approach applied to the free edge effect on composite materials[J].Composite structures,2013Apr.(Apr.):121-129. |
| [2] | Srinivasa D. Thoppul;Joana Finegan;Ronald F. Gibson.Mechanics Of Mechanically Fastened Joints In Polymer-matrix Composite Structures - A Review[J].Composites science and technology,20093/4(3/4):301-329. |
| [3] | Experimental analysis of failures in filled hole compression tests of carbon/epoxy laminate[J].Composite structures,20105(5):1192. |
| [4] | 钟小丹;陈普会.复合材料加筋壁板长桁终止端混合连接设计分析[J].复合材料学报,2013(6):197-202. |
| [5] | 郭绍伟;张永存;宋恩鹏;孙先念;徐雅楠;刘书田.开孔碳纤维层合板层间应力分析[J].复合材料学报,2011(5):228-233. |
| [6] | Interlaminar stress recovery for three-dimensional finite elements[J].Composites science and technology,20103(3):530. |
| [7] | 李亚智;郭晓波;黄志远.基于组合单元的层压复合材料三维应力分析[J].复合材料学报,2009(3):207-212. |
| [8] | C.M. Dakshina Moorthy;J.N. Rdeey.Recovery of interlaminar stresses and strain energy release rates in composite laminates[J].Finite elements in analysis & design,19991(1):1-27. |
| [9] | A. Turon;C.G. Davila;P.P. Camanho.An engineering solution for mesh size effects in the simulation of delamination using cohesive zone models[J].Engineering Fracture Mechanics,200710(10):1665-1682. |
| [10] | C.T.MCCARTHY;M.A.MCCARTHY;W.F.STANLEY;V.P.LAWLOR.Experiences with Modeling Friction in Composite Bolted Joints[J].Journal of Composite Materials,200521(21):1881-1908. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%