为了模拟功能梯度材料(FGM)在工程应用中可能会出现的断裂问题并计算相应的开裂载荷,通过编写用户自定义UEL子程序将梯度扩展单元嵌入到ABAQUS软件中模拟功能梯度材料的物理场,并编写交互能量积分后处理子程序计算裂纹尖端的混合模式应力强度因子(SIF),采用最大周向应力准则编写子程序计算裂纹的偏转角,并模拟了裂纹扩展路径,计算了裂纹的起裂载荷.讨论了材料梯度参数对裂纹扩展路径以及起裂载荷的影响规律.通过与均匀材料的对比,验证了功能梯度材料断裂性能的优越性.研究表明:外载平行于梯度方向时,垂直梯度方向的初始裂纹朝着等效弹性模量小的方向扩展,且偏转角在梯度指数线性时出现峰值,并随着组分弹性模量比的增加而变大;当外载和初始裂纹均平行于梯度方向时,材料等效弹性模量和断裂韧性的增加或者梯度指数的减小都导致起裂载荷变大.
参考文献
| [1] | Jin ZH;Feng YZ.Thermal fracture resistance of a functionally graded coating with periodic edge cracks[J].Surface & Coatings Technology,200817(17):4189-4197. |
| [2] | X.F. Yao;W. Xu;S.L. Bai;H.Y. Yeh.Caustics analysis of the crack initiation and propagation of graded materials[J].Composites science and technology,20083/4(3/4):953-962. |
| [3] | Abanto-Bueno J;Lambros J.An experimental study of mixed mode crack initiation and growth in functionally graded materials[J].Experimental Mechanics,20062(2):179-196. |
| [4] | Matthew T. Tilbrook;Robert J. Moon;Mark Hoffman.Crack propagation in graded composites[J].Composites science and technology,20052(2):201-220. |
| [5] | Rousseau C.-E.;Tippur H.V..COMPOSITIONALLY GRADED MATERIALS WITH CRACKS NORMAL TO THE ELASTIC GRADIENT[J].Acta materialia,200016(16):4021-4033. |
| [6] | Jeong-Ho Kim;Glaucio H. Paulino.On Fracture Criteria for Mixed-Mode Crack Propagation in Functionally Graded Materials[J].Mechanics of Advanced Materials and Structures,20074(4):227-244. |
| [7] | Claudia Comi;Stefano Mariani.Extended finite element simulation of quasi-brittle fracture in functionally graded materials[J].Computer Methods in Applied Mechanics and Engineering,200741/44(41/44):4013-4026. |
| [8] | M. Steigemann;M. Specovius-Neugebauer;M. Fulland;H.A. Richard.Simulation of crack paths in functionally graded materials[J].Engineering Fracture Mechanics,201011(11):2145-2157. |
| [9] | Sukumar N.;Prevost JH..Modeling quasi-static crack growth with the extended finite element method Part I: Computer implementation[J].International Journal of Solids and Structures,200326(26):7513-7537. |
| [10] | Jeong-Ho Kim;Glaucio H. Paulino.An accurate scheme for mixed-mode fractur analysis of functionally graded materials using the interaction integral and micromechanics models[J].International Journal for Numerical Methods in Engineering,200310(10):1457-1497. |
| [11] | JEONG-HO KIM;GLAUCIO H. PAULINO.Simulation of crack propagation in functionally graded materials under mixed-mode and non-proportional loading[J].International journal of mechanics and materials in design,20041(1):63-94. |
| [12] | 陈康;许希武;郭树祥.梯度复合材料应力强度因子计算的梯度扩展单元法[J].复合材料学报,2013(3):168-176. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%