为了研究树脂基复合材料曲面结构件的固化变形过程,首先分析了碳纤维增强树脂基复合材料在固化过程中密度、模量、热膨胀系数、比热容及热传导系数等材料物性的变化,并将这些变化引入到数值模拟当中.接着,针对复合材料复杂曲面结构件,提出了利用定常流动的流线方程构建曲线坐标系的新方法.然后,根据建立的曲线坐标系,运用有限元法计算了某轻型飞机机翼上蒙皮板在固化过程中内部温度、固化度和内应力的分布情况以及材料物性随固化度的变化情况.最后,计算了由于内部温度场和固化度场的不均匀、热膨胀系数的各向异性和固化引起的树脂体积收缩而导致的结构变形.结果表明:引入材料物性变化使固化过程的数值模拟更加合理、模拟结果更加精确,利用定常流动的流线方程构建的曲线坐标系适用于复合材料曲面结构件的有限元分析.所得结论对研究树脂基复合材料的固化变形过程和各向异性复合材料复杂曲面构件的三维实体建模均具有指导意义.
参考文献
| [1] | V. A. R Costa;A. C. M. Sousa.Modeling of flow and thermo-kinetics during the cure of thick laminated composites[J].International Journal of Thermal Sciences,20031(1):15-22. |
| [2] | 谭华;晏石林.热固性树脂基复合材料固化过程的三维数值模拟[J].复合材料学报,2004(6):167-172. |
| [3] | D.J.Michaud;A.N.Beris;P.S.Dhurjati.Thick-Sectioned RTM Composite Manufacturing, part II. Robust Cure Cycle Optimization and Control[J].Journal of Composite Materials,200210(10):1201-1231. |
| [4] | Bih-Cherng Chern;Tess J. Moon;John R. Howell;Wiling Tan.New Experimental Data for Enthaly of Reaction and Temperature- and Degree-of-Cure-Dependent Specific Heat and Thermal Conductivity of the Hercules[J].Journal of Composite Materials,200217(17):2061-2072. |
| [5] | Patricia Prasatya;Gregory B.McKenna;Sindee L.Simon.A Viscoelastic Model for Predicting Isotropic Residual Stresses in Thermosetting Materials: Effects of Processing Parameters[J].Journal of Composite Materials,200110(10):826-848. |
| [6] | Yan XQ.Finite element modeling of curing of epoxy matrix composites[J].Journal of Applied Polymer Science,20074(4):2310-2319. |
| [7] | J. Magnus Svanberg;J. Anders Holmberg.Prediction of shape distortions Part I. FE-implementation of a path dependent constitutive model[J].Composites, Part A. Applied science and manufacturing,20046(6):711-721. |
| [8] | Liang G;Chandrashekhara K.Cure kinetics and rheology characterization of soy-based epoxy resin system[J].Journal of Applied Polymer Science,20064(4):3168-3180. |
| [9] | Xiangqiao Van.Consolidation Simulation of Composite Laminates:Formulation and Validation Verification[J].Polymer Composites,20056(6):813-822. |
| [10] | Daniel D.Shin;H.Thomas Hahn.Compaction of Thick Composites:Simulation and Experiment[J].Polymer Composites,20041(1):49-59. |
| [11] | J. M. Svanberg;J. A. Holmberg.Prediction of shape distortions. Part II. Experimental validation and analysis of boundary conditions[J].Composites, Part A. Applied science and manufacturing,20046(6):723-734. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%