以1Cr18Ni9Ti、Ti-6Al-4V为金属基底,通过在B4C+Ti体系中引入CrO3+Al铝热剂,调整反应体系绝热温度依次为3 193、3 282、3 290及3 473 K,采用超重力场反应连接制备TiB2-TiC/1 Cr18 Ni9 Ti和TiB2-TiC/Ti-6 Al-4V梯度复合材料,发现随着反应绝热温度升高,陶瓷/金属界面区厚度不仅因金属熔深增加而增大,并且残存于界面上的Al2O3夹杂也随之增多.分别对B4C+Al体系与CrO3+Al铝热剂进行配制、球磨活化、压制成坯并依次填料入坩埚后,发现残存于界面上的Al2O3夹杂完全消除,同时发现在TiB2-TiC/1Cr18Ni9Ti界面上生成三维网络陶瓷/金属梯度复合结构,而在TiB2-TiC/Ti-6 Al-4V界面上形成跨尺度多层次梯度复合结构.
参考文献
| [1] | D. Vallauri;I.C.Atias Adrian;A. Chrysanthou.TiC-TiB_2 composites: A review of phase relationships, processing and properties[J].Journal of the European Ceramic Society,20088(8):1697-1713. |
| [2] | Feng HB;Meng QC;Zhou Y;Jia DC.Spark plasma sintering of functionally graded material in the Ti-TiB2-B system[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,20051/2(1/2):92-97. |
| [3] | Shimada, S;Fuji, Y;Tsujino, J;Yamazaki, I.Thermal plasma CVD and wear resistance of double layered Ti-Si-B-C/Ti-B-C coatings on WC-Co cutting tools with various roughness[J].Surface & Coatings Technology,201011(11):1715-1721. |
| [4] | 王海涛;黄继华;朱警雷;张华;赵共科.反应等离子喷涂TiC/Fe-Ni复合涂层及其耐冲蚀性能[J].复合材料学报,2009(1):74-79. |
| [5] | Li Jianing;Chen Chuanzhong;He Qingshan.Influence of Cu on microstructure and wear resistance of TiC/TiB/TiN reinforced composite coating fabricated by laser cladding[J].Materials Chemistry and Physics,20122/3(2/3):741-745. |
| [6] | JUN CHEOL OH;EUNSUB YUN;SUNGHAK LEE.Correlation of Microstructure with the Hardness and Wear Resistance of (TiC, SiC)/Ti-6Al-4V Surface Composites Fabricated by High-Energy Electron-Beam Irradiation[J].Metallurgical and materials transactions. A, physical metallurgy and materials science,20042(2):525-534. |
| [7] | 郭绍庆;袁鸿;谷卫华;余槐;崔岩;李晓红.采用非增强中间层电子束焊接SiCp/Al[J].复合材料学报,2006(1):92-98. |
| [8] | Yin, Chun;Chen, YangQuan;Zhong, Shou-ming.Fractional-order sliding mode based extremum seeking control of a class of nonlinear systems[J].Automatica,201412(12):3173-3181. |
| [9] | Chun Yin;Shou-ming Zhong;Wu-fan Chen.Design of sliding mode controller for a class of fractional-order chaotic systems[J].Communications in nonlinear science and numerical simulation,20121(1):356-366. |
| [10] | Chun Yin;Sara Dadras;Shou-ming Zhong;YangQuan Chen.Control of a novel class of fractional-order chaotic systems via adaptive sliding mode control approach[J].Applied mathematical modelling,20134(4):2469-2483. |
| [11] | Yin, Chun;Stark, Brandon;Chen, YangQuan;Zhong, Shou-ming;Lau, Erik.Fractional-order adaptive minimum energy cognitive lighting control strategy for the hybrid lighting system[J].Energy and buildings,2015Jan.(Jan.):176-184. |
| [12] | Zhongmin Zhao;Long Zhang;Yigang Song.Microstructures and properties of large bulk solidified TiC-TiB_2 composites prepared by combustion synthesis under high gravity[J].Scripta materialia,20093(3):281-284. |
| [13] | 潘传增;张龙;赵忠民;曲振生;杨权.超重力下燃烧合成TiB_2-TiC共晶复合陶瓷[J].复合材料学报,2010(1):109-117. |
| [14] | 黄雪刚;张龙;赵忠民;潘传增.超重力场燃烧合成TiC-TiB2凝固陶瓷组织与性能[J].复合材料学报,2012(5):113-120. |
| [15] | Huang, X.;Zhao, Z.;Zhang, L..Fusion bonding of solidified TiC-TiB_2 ceramic to Ti-6Al-4V alloy achieved by combustion synthesis in high-gravity field[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2013:400-407. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%