为研究纳米纤维增强闭孔泡沫材料的力学性能,采用Voronoi随机泡沫模型对闭孔泡沫材料的细观几何结构进行模拟,并将纳米纤维随机分布在泡沫材料的胞壁中,利用改进的自动搜索耦合(ASC)技术将纤维单元与基体单元进行耦合,建立了能够反映纳米纤维增强闭孔泡沫材料细观结构的数值模型.在此基础上,进一步研究了泡沫模型随机度、相对密度以及纳米纤维长径比和质量分数对纳米纤维增强闭孔泡沫材料弹性模量与屈服强度的影响规律.结果表明:由所建立的数值模型得到的纳米纤维增强闭孔泡沫材料的弹性模量和屈服强度与实验值吻合较好;提高泡沫模型的随机度会使复合泡沫材料的弹性模量和屈服强度增加,而当随机度达到0.450以后,材料的弹性模量和屈服强度几乎不再发生变化;当相对密度在0.05～0.30范围内变化时,复合泡沫材料的弹性模量与屈服强度几乎随相对密度的增加呈线性增长;提高纳米纤维长径比和质量分数也会使材料的弹性模量和屈服强度得到提高,但当纤维长径比达到500以后,纤维长径比的增强作用逐渐减弱.所得结论对纳米纤维增强闭孔泡沫材料的制备具有重要意义.
参考文献
| [1] | JlONG SHEN;XlANGMIN HAN;L.JAMES LEE.Nanoscaled Reinforcement of Polystyrene Foams using Carbon Nanofibers[J].Journal of Cellular Plastics,20062(2):105-126. |
| [2] | Lingfei Zhang;Ezgi Deniz Yilmaz;Jan Schjodt-Thomsen;Jens Chr. Rauhe;Ryszard Pyrz.MWNT reinforced polyurethane foam: Processing, characterization and modelling of mechanical properties[J].Composites science and technology,20116(6):877-884. |
| [3] | Yan, D.-X.;Dai, K.;Xiang, Z.-D.;Li, Z.-M.;Ji, X.;Zhang, W.-Q..Electrical conductivity and major mechanical and thermal properties of carbon nanotube-filled polyurethane foams[J].Journal of Applied Polymer Science,20115(5):3014-3019. |
| [4] | Chen, L.;Schadler, L.S.;Ozisik, R..An experimental and theoretical investigation of the compressive properties of multi-walled carbon nanotube/poly(methyl methacrylate) nanocomposite foams[J].Polymer: The International Journal for the Science and Technology of Polymers,201113(13):2899-2909. |
| [5] | Changchun Zeng;Nemat Hossieny;Chuck Zhang;Ben Wang;Shawn M. Walsh.Morphology and tensile properties of PMMA carbon nanotubes nanocomposites and nanocomposites foams[J].Composites science and technology,2013Jun.(Jun.):29-37. |
| [6] | Chen, L.;Ozisik, R.;Schadler, L.S..The influence of carbon nanotube aspect ratio on the foam morphology of MWNT/PMMA nanocomposite foams[J].Polymer: The International Journal for the Science and Technology of Polymers,201011(11):2368-2375. |
| [7] | 卢子兴;王建月.开孔Voronoi泡沫支柱形状变化对力学性能的影响[J].航空动力学报,2009(9):2007-2011. |
| [8] | 卢子兴;王建月.壁面厚度随机度对闭孔 Voronoi泡沫材料弹性性能的影响[J].航空动力学报,2010(3):592-596. |
| [9] | Zixing Lu;Zeshuai Yuan;Qiang Liu.3D numerical simulation for the elastic properties of random fiber composites with a wide range of fiber aspect ratios[J].Computational Materials Science,2014:123-129. |
| [10] | 卢子兴;王嵩.闭孔Voronoi泡沫的几何特征分析[J].应用基础与工程科学学报,2008(1):110-117. |
| [11] | M.C. Saha;Md.E. Kabir;S. Jeelani.Enhancement in thermal and mechanical properties of polyurethane foam infused with nanoparticles[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,20081/2(1/2):213-222. |
| [12] | 王嵩;卢子兴.闭孔Voronoi泡沫的弹性性能分析[J].航空学报,2007(3):574-578. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%