为了设计周期性多孔钢或钢/铝复合材料优化微结构，基于独立连续映射法，建立了以结构总质量最小化为目标，节点位移为约束的拓扑优化模型。假设宏观结构由多孔材料或复合材料组成，其等效特性采用均匀化理论计算得到。定义了微观材料拓扑变量，节点位移约束采用一阶泰勒展开近似。各种材料设计要求作为约束条件纳入到优化模型中。推导了节点位移和总质量的敏度表达式。采用基于求解偏微分的过滤方法消除了数值不稳定性。在二维数值算例中获得了各种满足设计要求的优化材料微结构。结果表明：提出的方法在材料微结构拓扑优化设计中具有可行性和有效性。
To design periodic optimized microstructures of cellular steel or steel/aluminum composites,a topologi-cal optimization model was developed by independent continuous mapping method where minimized total mass of structure was taken as obj ective,and nodal displacement was referred to as constraint condition.It is assumed that macrostructure is made of cellular materials or composites whose effective properties are calculated through the hom-ogenization theory.Topological variables in micromaterials were defined.Nodal displacement constraint was approx-imately formulated in terms of the first-order Taylor expansion.Various demands for designing materials were trea-ted as constraint conditions in optimization model.The sensitivities expression of nodal displacement and total mass were derived.Filtering method by solving partial differential equation was adopted to eliminate numerical instabili-ties.A variety of optimal material microstructures which meet design requirements have been obtained in some 2D numerical examples.The results validate the feasibility and effectiveness of the proposed method for the topology optimization design for microstructures of materials.
参考文献
| [1] | O.Sigmund;S.Torquato.Design of materials with extreme thermal expansion using a three-phase topology optimization method[J].Journal of the Mechanics and Physics of Solids,19976(6):1037-1067. |
| [2] | Cadman, J.E.;Zhou, S.;Chen, Y.;Li, Q..On design of multi-functional microstructural materials[J].Journal of Materials Science,20131(1):51-66. |
| [3] | O. Sigmund;K. Maute.Topology optimization approaches[J].Structural and multidisciplinary optimization,20136(6):1031-1055. |
| [4] | Huang X;Xie YM.Optimal design of periodic structures using evolutionary topology optimization[J].Structural and multidisciplinary optimization,20086(6):597-606. |
| [5] | Xie, Y.M.;Zuo, Z.H.;Huang, X.;Rong, J.H..Convergence of topological patterns of optimal periodic structures under multiple scales[J].Structural and multidisciplinary optimization,20121(1):41-50. |
| [6] | Zhi Hao Zuo;Yi Min Xie;Xiaodong Huang.Optimal Topological Design of Periodic Structures for Natural Frequencies[J].Journal of Structural Engineering,201110(10):1229-1240. |
| [7] | Zuo, Z.H.;Huang, X.;Yang, X.;Rong, J.H.;Xie, Y.M..Comparing optimal material microstructures with optimal periodic structures[J].Computational Materials Science,2013:137-147. |
| [8] | Zhang WH;Sun SP.Scale-related topology optimization of cellular materials and structures[J].International Journal for Numerical Methods in Engineering,20069(9):993-1011. |
| [9] | Ling Liu;Jun Yan;Gengdong Cheng.Optimum structure with homogeneous optimum truss-like material[J].Computers & structures,200813/14(13/14):1417-1425. |
| [10] | Niu, B;Yan, J;Cheng, GD.Optimum structure with homogeneous optimum cellular material for maximum fundamental frequency[J].Structural and multidisciplinary optimization,20092(2):115-132. |
| [11] | LIU YuanDong;YIN YiHui;GUO ZhongZe.Static and dynamic design based on hierarchical optimization for materials and structure of porous metals[J].中国科学:技术科学（英文版）,2012(10):2808-2814. |
| [12] | 刘远东;尹益辉;郭中泽.尺度关联的微结构构型与排布的材料/结构动力学设计[J].复合材料学报,2011(4):180-184. |
| [13] | Huang, X.;Zhou, S.W.;Xie, Y.M.;Li, Q..Topology optimization of microstructures of cellular materials and composites for macrostructures[J].Computational Materials Science,2013:397-407. |
| [14] | X. Yan;X. Huang;Y. Zha;Y.M. Xie.Concurrent topology optimization of structures and their composite microstructures[J].Computers & structures,2014Mar.(Mar.):103-110. |
| [15] | Zhi Hao Zuo;Xiaodong Huang;Jian Hua Rong;Yi Min Xie.Multi-scale design of composite materials and structures for maximum natural frequencies[J].Materials & design,2013Oct.(Oct.):1023-1034. |
| [16] | Xu, Bin;Xie, Yi Min.Concurrent design of composite macrostructure and cellular microstructure under random excitations[J].Composite structures,2015May(May):65-77. |
| [17] | Xu, Bin;Jiang, Jie Sheng;Xie, Yi Min.Concurrent design of composite macrostructure and multi-phase material microstructure for minimum dynamic compliance[J].Composite structures,2015Sep.(Sep.):221-233. |
| [18] | 隋允康;彭细荣.结构拓扑优化ICM方法的改善[J].力学学报,2005(2):190-198. |
| [19] | 叶红玲;沈静娴;隋允康.频率约束的三维连续体结构动力拓扑优化设计[J].力学学报,2012(6):1037-1045. |
| [20] | Erik Andreassen;Casper Schousboe Andreasen.How to determine composite material properties using numerical homogenization[J].Computational Materials Science,2014:488-495. |
| [21] | Yunkang Sui;Xirong Peng.The ICM method with objective function transformed by variable discrete condition for continuum structure[J].力学学报（英文版）,2006(01):68-75. |
| [22] | A. Radman;X. Huang;Y. M. Xie.Topological optimization for the design of microstructures of isotropic cellular materials[J].Engineering Optimization,201310/12(10/12):1331-1348. |
| [23] | Sigmund O.;Petersson J..Numerical instabilities in topology optimization: A survey on procedures dealing with checkerboards, mesh-dependencies and local minima [Review][J].Structural Optimization,19981(1):68-75. |
| [24] | Lazarov, B.S.;Sigmund, O..Filters in topology optimization based on Helmholtz-type differential equations[J].International Journal for Numerical Methods in Engineering,20116(6):765-781. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%