为了准确描述复合材料编织物的各向异性力学特性，首先，基于纤维增强复合材料连续介质力学理论提出了一种考虑纤维双拉耦合的复合材料编织物各向异性超弹性本构模型，该模型中单位体积的应变能被解耦为便于参数识别的纤维拉伸变形能、双拉耦合引起的挤压变形能和纤维间角度变化产生的剪切变形能；然后，给出了模型参数的确定方法，并通过拟合单轴拉伸、双轴拉伸和镜框剪切实验数据得到了本构模型参数；最后，利用该模型对双轴拉伸和镜框剪切实验进行了数值仿真，并将模拟结果与实验结果对比分析。结果表明：提出的本构模型适用于表征复合材料编织物在成型过程中由于大变形引起的非线性各向异性力学行为。所得结论表明提出的本构模型具有简单、实用的优点，且材料参数容易确定，可为复合材料编织物成型的数值模拟和工艺优化奠定理论基础。
In order to characterize the anisotropic mechanical behaviors of woven fabric composites precisely,based on fiber reinforced composite continuum medium mechanics theory,an anisotropic hyperelastic constitutive model with biaxial tension coupling of fiber for woven fabric composites was proposed firstly.The unit-volume strain ener-gy in the model was decomposed into the deformation energy of fiber elongation,the compaction deformation energy due to biaxial tension coupling and shear deformation energy due to the change of angels between fibers.Then,de-termination approach for model parameters was given,and parameters of constitutive model were obtained by fitting the uni-axial tensile,biaxial tensile and picture-frame shear experiment data.Finally,the numerical simulation of bi-axial tensile and picture-frame shear experiments was conducted by the model,and the simulation results were con-trasted and analyzed with experiment data.The results show that the constitutive model proposed is suitable to char-acterize the non-linear and anisotropic mechanical behaviors cased by large deformation of woven fabric composites during forming process.The conclusions obtained show that the proposed constitutive model has advantages of sim-ple and useful,and the determination of material parameters is easy,which can lay down the theoretical foundation for the numerical simulation and processing optimization for the forming of woven fabric composites.
参考文献
| [1] | 何东晓.先进复合材料在航空航天的应用综述[J].高科技纤维与应用,2006(02):9-11,19. |
| [2] | U. Mohammed;C. Lekakou.Experimental studies and analysis of the draping of woven fabrics[J].Composites, Part A. Applied science and manufacturing,200012(12):1409-1420. |
| [3] | 张琦;高强;赵升吨.碳纤维复合材料板热冲压成形试验研究[J].机械工程学报,2012(18):72-77. |
| [4] | P. Harrison;R. Gomes;N. Curado-Correia.Press forming a 0/90 cross-ply advanced thermoplastic composite using the double-dome benchmark geometry[J].Composites, Part A. Applied science and manufacturing,2013:56-69. |
| [5] | 丁纺纺;彭雄奇.复合材料用机织物非正交本构模型的半球形冲压成型验证[J].复合材料学报,2011(1):156-160. |
| [6] | P.Boisse;K.Buet;A.Gasser.Meso/macro-mechanical behaviour of textile reinforcements for thin composites[J].Composites science and technology,20013(3):395-401. |
| [7] | Philippe Boisse;Bassem Zouari;Alain Gasser.A mesoscopic approach for the simulation of woven fibre composite forming[J].Composites science and technology,20053/4(3/4):429-436. |
| [8] | X. Q. PENG;J. CAO.A continuum mechanics-based non-orthogonal constitutive model for woven composite fabrics[J].Composites, Part A. Applied science and manufacturing,20056(6):859-874. |
| [9] | 彭雄奇;堵同亮;郭早阳.机织复合材料各向异性超弹性本构模型[J].机械工程学报,2012(20):45-50. |
| [10] | Aimene, Y;Vidal-Salle, E;Hagege, B;Sidoroff, F;Boisse, P.A Hyperelastic Approach for Composite Reinforcement Large Deformation Analysis[J].Journal of Composite Materials,20101(1):5-26. |
| [11] | A.S. Milani;J.A. Nemes.An intelligent inverse method for characterization of textile reinforced thermoplastic composites using a hyperelastic constitutive model[J].Composites science and technology,200410/11(10/11):1565-1576. |
| [12] | P. Boisse;N. Hamila;E. Vidal-Salle;F. Dumont.Simulation of wrinkling during textile composite reinforcement forming. Influence of tensile, in-plane shear and bending stiffnesses[J].Composites science and technology,20115(5):683-692. |
| [13] | A. Charmetant;E. Vidal-Salle;P. Boisse.Hyperelastic modelling for mesoscopic analyses of composite reinforcements[J].Composites science and technology,201114(14):1623-1631. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%