基于机器人的复合材料缠绕不同缠绕策略会对缠绕工艺及机器人运动稳定性产生影响，为获得使机器人运动稳定性更优的缠绕策略，研究了6自由度工业机器人的复合材料缠绕工作站，单独分析了包络形式、悬纱长度以及测地线/非测地线缠绕等参数对缠绕工艺及机器人运动稳定性的变化参数的影响，采用 MATLAB进行不同缠绕策略的机器人缠绕轨迹计算，确定规划后的缠绕轨迹，基于 ADAMS和 MATLAB进行机器人缠绕动力学联合仿真，获取机器人各关节力矩曲线，分析规划后的缠绕轨迹对机器人运动稳定性的影响。进行了复合材料制品干纤维缠绕实验，缠绕实验表明：采用优化后的缠绕策略进行复合材料制品缠绕时缠绕线型稳定，缠绕过程无滑纱、交叠、架空等现象，缠绕精度完全满足设计要求。
Different winding strategies of composite winding based on robot can influence the winding craft and ki-netic stability of the robot.In order to get better winding strategy of the robot kinetic stability,composite winding workstation of industrial robot with 6 degree of freedom was studied,in which individually analyze the influence of enveloping form,length of the hanging filament,geodesic and non-geodesic winding etc.on the robot kinetic stabili-ty and the variation parameters.MATLAB was used to calculate robot winding tracks in different winding strategies and determine winding track after proj ecting.Joint simulation of robot winding dynamics based on ADAMS and MATLAB was conducted to obtain curves of each joint torque of the robot,then the influence of the winding track after proj ecting on the robot kinetic stability of was analyzed.The experiment of dry fiber winding of composite products was carried out.The winding experiment indicates the optimized winding method adopts to stabilize the winding pattern and has no slip yarn,overlapping,overhead and other phenomena in the winding process,and the winding precision completely meets the design requirements.
参考文献
| [1] | 史耀耀;俞涛;何晓东;康超;张晓扬;张军.复合材料带缠绕成型工艺参数耦合机制及优化[J].复合材料学报,2015(3):831-839. |
| [2] | Bijan Shirinzadeh;Gary Cassidy;Denny Oetomo;Gursel Alici;Marcelo H. Ang Jr.Trajectory generation for open-contoured structures in robotic fibre placement[J].Robotics and Computer Integrated Manufacturing: An International Journal of Manufacturing and Product and Process Development,20074(4):380-394. |
| [3] | W. Polini;L. Sorrentino.Actual Safety Distance and Winding Tension to Manufacture Full Section Parts by Robotized Filament Winding[J].Journal of engineering materials and technology,20063(3):393-400. |
| [4] | W. POLINI;L. SORRENTINO.AR Models to Forecast Roving Tension Trend in a Robotized Filament Winding Cell[J].Materials and Manufacturing Processes,20067/8(7/8):870-876. |
| [5] | Tauseef Aized;Bijan Shirinzadeh.Robotic fiber placement process analysis and optimization using response surface method[J].The International Journal of Advanced Manufacturing Technology,20111/4(1/4):393-404. |
| [6] | Lianfang Tian;Curtis Collins.An effective robot trajectory planning method using a genetic algorithm[J].Mechatronics: The Science of Intelligent Machines,20045(5):455-470. |
| [7] | 矫维成;王荣国;刘文博;杨帆;赫晓东.缠绕纤维与芯模表面间滑线系数的测量表征[J].复合材料学报,2012(3):191-196. |
| [8] | Charles F. F. Karney.Algorithms for geodesies[J].Journal of geodesy,20131(1):43-55. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%