欢迎登录材料期刊网

材料期刊网

高级检索

采用广义微分求积(GDQ)法开展了不同边界条件下承受面内线性变化载荷作用复合材料层合板振动与屈曲的分析与优化.针对GDQ法求解面内线性变化载荷工况复合材料层合板屈曲问题存在计算振荡、不收敛现象,提出载荷扰动策略实现了GDQ法对复合材料层合板屈曲问题的稳定高效求解.基于基础圆频率和临界屈曲载荷系数的归一化指标,分析了铺层角度对复合材料层合板综合性能的影响,并结合直接搜索模拟退火算法开展了复合材料层合板的铺层顺序优化.结果表明:铺层角度变化对屈曲性能的影响明显强于频率特性;面内线性变化载荷中,以弯曲载荷作用下复合材料层合板的优化综合性能受边界条件变化的影响最小,而优化铺层角度受边界条件变化的影响最大.研究结果为复杂载荷作用下复合材料层合板的设计提供了参考.

参考文献

[1] 吴浩;燕瑛.基于可靠性的复合材料结构稳定性约束优化设计[J].复合材料学报,2007(5):149-153.
[2] Luyang Shan;Pizhong Qiao.Explicit local buckling analysis of rotationally restrained composite plates under uniaxial compression[J].Engineering structures,20081(1):126-140.
[3] I. Shufrin;O. Rabinovitch;M. Eisenberger.Buckling of laminated plates with general boundary conditions under combined compression, tension, and shear--A semi-analytical solution[J].Thin-Walled structures,20087/9(7/9):925-938.
[4] 袁坚锋;尼早;陈保兴.弯剪复合载荷作用下复合材料层合板屈曲的强度校核方法[J].复合材料学报,2014(1):234-240.
[5] A.V. Lopatin;E.V. Morozov.Buckling of the SSFF rectangular orthotropic plate under in-plane pure bending[J].Composite structures,20093(3):270-278.
[6] 袁坚锋;尼早;陈保兴.面内弯曲载荷作用下两边简支两边固支复合材料层合板的屈曲[J].航空学报,2014(4):1026-1033.
[7] Hongzhi Zhong;Chao Gu.Buckling of symmetrical cross-ply composite rectangular plates under a linearly varying in-plane load[J].Composite structures,20071(1):42-48.
[8] Romeo G.;Ferrero G..Analytical/experimental behavior of anisotropic rectangular panels under linearly varying combined loads[J].AIAA journal,20015(5):932-941.
[9] Wang XW;Gan LF;Wang YL.A differential quadrature analysis of vibration and buckling of an SS-C-SS-C rectangular plate loaded by linearly varying in-plane stresses[J].Journal of Sound and Vibration,20061/2(1/2):420-431.
[10] 付为刚;程文明;濮德璋;任扬志.复合受载下简支矩形板屈曲分析的微分求积法[J].机械设计与研究,2012(5):103-106.
[11] M. Kadkhodayan;M. Maarefdoust.Elastic/plastic buckling of isotropic thin plates subjected to uniform and linearly varying in-plane loading using incremental and deformation theories[J].Aerospace science and technology,20141(1):66-83.
[12] 滕兆春;陈桂佳;马鹏超.变厚度矩形板自由振动的广义微分求积法分析[J].兰州理工大学学报,2011(2):168-171.
[13] M. Darvizeh;A. Darvizeh;R. Ansari;C.B. Sharma.Buckling analysis of generally laminated composite plates (generalized differential quadrature rules versus Rayleigh-Ritz method)[J].Composite Structures,20041(1):69-74.
[14] 孙士平;张卫红.基于改进模拟退火算法的复合材料层合板频率优化[J].复合材料学报,2015(3):902-910.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%