欢迎登录材料期刊网

材料期刊网

高级检索

采用微波烧结法制备TiC/Ti6Al4V复合材料,研究TiC/Ti6Al4V复合材料在550、650和750℃空气中的恒温氧化行为,并对氧化膜的表面、截面形貌及相组成进行了分析。结果表明:TiC/Ti6Al4V 复合材料由 TiC、ɑ-Ti+β-Ti三种物相组成。随着氧化温度的增加,TiC/Ti6Al4V复合材料的氧化规律由抛物线型转变为直线型,在650℃温度以下,复合材料的氧化产物主要由TiO2组成,而750℃时氧化层主要有外层极薄的 TiO2、中间层Al2 O3和TiO2混合区及大部分内层TiO2三部分组成。随着 TiC含量增加,氧化激活能增大,氧化物粒径减小, TiC/Ti6Al4V复合材料的抗氧化性能也越好。

TiC/Ti6Al4V composites were fabricated by microwave sintering.The isothermal oxidation behaviors of the TiC/Ti6Al4V composites were investigated in air under the temperature of 550,650 and 750 ℃.Moreover,the surface and cross-sectional morphologies and phase composition of the oxidation film were investigated.The results show that the TiC/Ti6Al4V composites are composed of TiC,α-Ti+β-Ti phases.With increase of the oxidation temperature,the oxidation rule curves change from parabola into line.The oxidation products of the composites mainly consist of TiO2 as the oxidation temperature lower than 650 ℃.While the oxidation temperature is high up to 750 ℃,the oxidation coatings are composed of three layers,containing thin outer TiO2 ,intermediate Al2 O3 and TiO2 and inner TiO2 .With the TiC content increases,the oxygen activation energy increases,the particle size of ox-ide decreases and the oxidation resistance of TiC/Ti6Al4V composites improves.

参考文献

[1] 周慧;刘正堂;李争显;杜继红.钛合金表面微弧氧化膜及抗氧化性能的研究[J].稀有金属材料与工程,2005(11):1835-1838.
[2] 王宝云;李争显;严鹏;杜继红;姬寿长.钛合金表面电弧离子镀TiN/TiAlN多层复合涂层的组织及抗氧化性能研究[J].钛工业进展,2008(2):32-36.
[3] 郑婷;骆心怡;孙晓宾;崔宏;陶杰.钛合金表面抗氧化技术的研究进展[J].机械工程材料,2010(4):11-13,86.
[4] 张丽华;金云学;郭宇航.颗粒增强钛基复合材料的高温氧化行为研究进展[J].铸造,2006(12):1251-1254.
[5] 王悔改;邓猛;张帅强;魏尊杰.碳化物含量对钛基复合材料高温氧化行为的影响[J].铸造技术,2010(7):860-864.
[6] 耿林;倪丁瑞;郑镇洙.原位自生非连续增强钛基复合材料的研究现状与展望[J].复合材料学报,2006(1):1-11.
[7] 李月英;彭丽华;张驰;曹占义;刘勇兵.TiB_2颗粒增强钛基复合材料抗氧化性能[J].复合材料学报,2010(2):72-76.
[8] 毛小南;曾泉浦.颗粒强化钛基复合材料的氧化特性[J].稀有金属材料与工程,1997(01):35-37.
[9] 范景莲;黄伯云;刘军;吴恩熙.微波烧结原理与研究现状[J].粉末冶金工业,2004(1):29-33.
[10] Dong-Bo Wei;Ping-Ze Zhang;Zheng-Jun Yao;Wen-Ping Liang;Qiang Miao;Zhong Xu.Oxidation of double-glow plasma chromising coating on TC4 titanium alloys[J].Corrosion Science: The Journal on Environmental Degradation of Materials and its Control,2013Jan.(Jan.):43-50.
[11] 贾蔚菊;曾卫东;刘建荣;王青江;周义刚.Ti60高温钛合金氧化行为研究[J].稀有金属材料与工程,2010(5):781-786.
[12] 覃业霞;吕维洁;徐栋;张获.原位合成(TiB+TiC)/Ti6242基复合材料高温氧化行为[J].稀有金属材料与工程,2006(10):1647-1650.
[13] L.J. Huang;L Geng;Y. Fu;B. Kaveendran;H.X. Peng.Oxidation behavior of in situ TiCp/Ti6Al4V composite with self-assembled network microstructure fabricated by reaction hot pressing[J].Corrosion Science: The Journal on Environmental Degradation of Materials and its Control,2013Apr.(Apr.):175-180.
[14] Qin YX;Lu WJ;Zhang D;Qin JN;Ji B.Oxidation of in situ synthesized TiC particle-reinforced titanium matrix composites[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,20051/2(1/2):42-48.
[15] 曹磊 .熔铸法制备TiC/Ti-6Al-4V复合材料组织与力学性能研究[D].哈尔滨工业大学,2010.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%