在传统渗碳、渗氮及表面淬火工艺的汽车零部件表面强化技术基础上，简单综述了传统工艺在汽车零部件表面强化上应用的工艺优缺点及研究现状，重点阐述了新型表面形变强化、高能束流表面强化、表面冶金强化、表面复合强化及表面纳米强化的汽车零部件表面强化技术，详细介绍了目前广泛使用的新型表面形变强化中的喷丸强化工艺、高能束流表面强化中的激光表面淬火与电子束表面淬火工艺及表面冶金强化中等离子喷涂工艺的技术特点和应用现状，分析了国内外汽车零部件表面复合强化技术和表面纳米强化技术的工艺特点和研究现状，尤其是将表面复合强化技术中的传统工艺与传统工艺、传统工艺与新型工艺、新型工艺与新型工艺的多种复合工艺的相互结合及QPQ盐浴复合处理技术在汽车零部件表面强化上的应用，最后展望了未来汽车零部件表面强化技术的发展方向。
ABSTRACT:Based on the surface strengthening technology of auto parts such as the traditional carburizing, nitriding, and sur-face quenching process, research status and application of traditional process for surface strengthening of auto parts were briefly re-viewed. Advantages and disadvantages of traditional process in applications were pointed out, the new surface deformation strength-ening, high-energy beam surface strengthening, surface spray coating strengthening, surface compound strengthening and surface nano-strengthening of auto parts were expounded emphatically. The technical characteristics and application status of the currently widely used new shot peening of surface deformation strengthening, laser and electron beam surfacing quenching process of high-en-ergy beams for surface strengthening and plasma spray coating of surface spray coating strengthening were introduced in detail. The research progress and process characteristics of compound strengthening technology of auto part surface and surface nano-strengthe-ning technology at home and abroad were analyzed, especially the application of compound strengthening technology in auto part surface strengthening, such as combination of traditional process and traditional process, traditional process and new technology, new technology and new technology as well as QPQ compound technology. In the end, the development of surface strengthening technology for auto parts was prospected.
参考文献
| [1] | 徐滨士;朱绍华;刘世参.材料表面工程[M].哈尔滨:哈尔滨工业大学出版社,2005 |
| [2] | 朱有利,王燕礼,边飞龙,侯帅,谢俊峰.金属材料超声表面强化技术的研究与应用进展[J].机械工程学报,2014(20):35-45. |
| [3] | 臧晓蓓;黄锦滨;孙静 等.高能束表面改性技术的研究现状及发展趋势[J].中国材料科技与设备,2009,6(3):1-4. |
| [4] | XU B;LIANG X;DONG M S et al.Progress of nano-surface engineering[J].International Journal of Materials and Prod-uct Technology,2003,18(4):338-346. |
| [5] | 许一 .中英政府科技合作项目"用于高性能汽车零件的纳米复合涂层及复合表面工程系统”顺利完成[J].中国表面工程,2005,18(4):36. |
| [6] | 鲋谷清司,樊东黎.汽车技术的进展和零件材料、热处理、表面改性技术动向--车体的轻量化和燃料效率的提高[J].金属热处理,2009(03):109-117. |
| [7] | 王忠诚;孙向东.汽车零部件热处理技术[M].北京:化学工业出版社,2007 |
| [8] | K. Aslantas;S. Tasgetiren;Y. Yalcim .Austempering retards pitting failure in ductile iron spur gears[J].Engineering failure analysis,2004(6):935-941. |
| [9] | 陈晖,周细应.汽车齿轮热处理工艺的研究进展[J].材料导报,2010(13):93-96,101. |
| [10] | 安峻岐,刘新继,何鹏.渗碳与碳氮共渗催渗技术的发展与现状[J].金属热处理,2007(05):78-82. |
| [11] | P. Kula;R. Pietrasik;K. Dybowski .Vacuum carburizing-process optimization[J].Journal of Materials Processing Technology,2005(0):876-881. |
| [12] | PYE D.Practical Nitriding and Ferritic Nitrocarburizing[M].Ohio:ASM International,2003 |
| [13] | 李光瀛.汽车构件与零部件新材料及其热处理新技术的发展与应用[J].金属热处理,2010(12):1-13. |
| [14] | Bruno C. De Cooman;John G. Speer .Quench and Partitioning Steel: a New AHSS Concept for Automotive Anti-Intrusion Applications[J].Steel Research International,2006(9/10):634-640. |
| [15] | RUFFINI R S;RUFFINI R T;NEMKOV V S et al.Comput-er Simulation of Induction Heating[J].Magsoft Update,2000,6(1):1-8. |
| [16] | 周海,曾少鹏,袁石根.感应加热淬火技术的发展及应用[J].热处理技术与装备,2008(03):9-15,21. |
| [17] | HATANO A;NAMIKI K .Application of Hard Shot Peening to Automotive Transmission Gears[R].SAE International,1992. |
| [18] | 许正功,陈宗帖,黄龙发.表面形变强化技术的研究现状[J].装备制造技术,2007(04):69-71,75. |
| [19] | PREVéY P S;CAMMETT J .Low Cost Corrosion Damage Mitigation and Improved Fatigue Performance of Low Plas-ticity Burnished 7075-T6[J].Journal of Materials Engi-neering and Performance,2001,10(5):548-555. |
| [20] | ALTENBERGER I.Deep Rolling-the Past,the Present and the Future[A].Kassel,Germany:Institute of Materi-als Engineering,2005:6-9. |
| [21] | DALY J J;HARRISON J R;HACKEL L A.New Laser Tech-nology Makes Laser Shots Peening Commercially Affordable[A].Warsaw,Poland:Institute of Precision Mechanics,2000:386. |
| [22] | LIU Q;DING K;YE L.Spallation-Like Phenomenon Induced By Laser Shock Peening Surface Treatment on 7050 Aluminum Alloy[A].[s.l.]:School of Mechanical & Mining Engineering Publications,2004:235-240. |
| [23] | 栾伟玲,涂善东.喷丸表面改性技术的研究进展[J].中国机械工程,2005(15):1405-1409. |
| [24] | 冯淦,石连捷,吕坚,卢柯.低碳钢超声喷丸表面纳米化的研究[J].金属学报,2000(03):300-303. |
| [25] | G. Liu;S.C. Wang;X.F. Lou .LOW CARBON STEEL WITH NANOSTRUCTURED SURFACE LAYER INDUCED BY HIGH-ENERGY SHOT PEENING[J].Scripta materialia,2001(8-9):1791-1795. |
| [26] | 韩金华,鲁华宾.表面强化技术与应用[J].科技情报开发与经济,2009(18):212-213. |
| [27] | 王勇刚,马骁宇.激光在汽车工业中的发展现状与应用[J].应用光学,2004(05):1-2,6. |
| [28] | 温宗胤,冯树强,李宝灵,徐永宾.汽车模具材料表面强化中的激光相变硬化技术的研究与应用[J].制造技术与机床,2007(01):118-121. |
| [29] | K. Bewilogua;G. Brauer;A. Dietz;J. Gabler;G. Goch;B. Karpuschewski;B. Szyszka .Surface technology for automotive engineering[J].CIRP Annals,2009(2 CD/ROM):608-627. |
| [30] | 王玉玲,惠英龙,姚翠翠.齿轮激光淬火研究进展[J].表面技术,2014(05):109-117. |
| [31] | ALEXANDER V.The Use of Bipolar Current Pulses in E-lectro-spark Alloying of Metal[J].Surface and Coatings Technology,2003(168):129-135. |
| [32] | S.H.Choo;S.Lee .Surface hardening of a gray cast iron used for a diesel engine cylinder block using high-energy electron beam irradiation[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,1999(5):1211-1221. |
| [33] | BERGER L M.Application of Hard Metals as Thermal Spray Coatings[J].International Journal of Refractory Metals & Hard Materials,2014 |
| [34] | Albert Feuerstein;James Knapp;Thomas Taylor;Adil Ashary;Ann Bolcavage;Neil Hitchman .Technical and Economical Aspects of Current Thermal Barrier Coating Systems for Gas Turbine Engines by Thermal Spray and EBPVD: A Review[J].Journal of Thermal Spray Technology,2008(2):199-213. |
| [35] | 田浩亮,魏世丞,陈永雄,刘毅,童辉,徐滨士.高速电弧喷涂在工程机械零部件再制造领域中的应用现状[J].表面技术,2013(03):99-102. |
| [36] | 梁秀兵,陈永雄,白金元,刘燕,徐滨士.自动化高速电弧喷涂技术再制造发动机曲轴[J].中国表面工程,2010(02):112-116. |
| [37] | 田亚媛,瞿皎,秦亮,崔国栋.齿轮表面强化技术研究现状[J].热加工工艺,2011(24):211-215. |
| [38] | 罗勇,谢明强.QPQ技术在汽车零部件上的应用[J].现代零部件,2013(07):58-60. |
| [39] | K. Funatani .Emerging technology in heat treatment and surface engineering of automotive components[J].Metallurgia Italiana,2006(2):67-73. |
| [40] | 陈磊,揭晓华,于能,郑向新.气体软氮化工艺研究新进展[J].表面技术,2010(01):81-84. |
| [41] | Yimin Lin;Jian Lu;Liping Wang .Surface nanocrystallization by surface mechanical attrition treatment and its effect on structure and properties of plasma nitrided AISI 321 stainless steel[J].Acta materialia,2006(20):5599-5605. |
| [42] | 赵运伟,黄巍,田海燕,王晓雷.电泳-电沉积Ni-金刚石复合镀层及其耐磨性能研究[J].表面技术,2013(02):77-79,125. |
| [43] | Ozur GE.;Proskurovsky DI.;Rotshtein VP.;Markov AB. .Production and application of low-energy, high-current electron beams[J].Laser and Particle Beams,2003(2):157-174. |
| [44] | 王刚,焦孟旺,李贺,贡泽飞,魏元生,杨红新.热喷涂新技术在发动机减摩性能方面的应用和研究[J].表面技术,2014(01):103-108,130. |
| [45] | 张蒙科,韩彬.复合处理技术在硫化物自润滑薄膜制备中的应用[J].表面技术,2014(03):120-128. |
| [46] | Gui-jiang Li;Qian Peng;Cong Li .Microstructure analysis of 304L austenitic stainless steel by QPQ complex salt bath treatment[J].Materials Characterization,2008(9):1359-1363. |
| [47] | 姚玲珍,邓益中.复合盐浴渗氮QPQ处理新技术的发展与应用[J].内燃机与配件,2012(05):36-40,43. |
| [48] | WALLNER E;SARMA D H R;MYERS B et al.Nanotechn-ology Applications in Future Automobiles[R].SAE interna-tional,2010. |
| [49] | 徐滨士,谭俊,陈建敏.表面工程领域科学技术发展[J].中国表面工程,2011(02):1-12. |
| [50] | 徐滨士.再制造工程与自动化表面工程技术[J].金属热处理,2008(01):9-14. |
| [51] | K. Lu;J. Lu .Nanostructured surface layer on metallic materials induced by surface mechanical attrition treatment[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2004(0):38-45. |
| [52] | 熊礼威,崔晓慧,汪建华,张莹,易成,吴超,张林.纳米金刚石薄膜的应用及其研究进展[J].表面技术,2013(05):98-102,111. |
| [53] | Margarida C. Coelho;Guilhermina Torrao;Nazanin Emami;Jose Gracio .Nanotechnology in Automotive Industry: Research Strategy and Trends for the Future - Small Objects, Big Impacts[J].Journal of nanoscience and nanotechnology,2012(8):6621-6630. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%