简要回顾了晶粒长大理论并分析了现有Monte Carlo模拟方法的不足,提出了一个"择优转换"方法,确保节点转换时晶界向其曲率中心移动,以致模拟过程更接近物理基础,避免了重新形核的发生,使模拟效率大大提高,模拟的晶粒长大指数达到0.478,已接近理论值,组织形貌和实际材料正常晶粒长大组织基本一致.
参考文献
[1] | Mao W M, Zhao X B. Metal Recrystallization and Grain Growth. Beijing: Metallurgical Industry Press, 1994: 321,226(毛卫民,赵新兵.金属的再结晶和晶粒长大.北京:冶金工业出版社,1994:221,226) |
[2] | Hillert M. Acta Metall, 1965; 13:227 |
[3] | Bolling G F, Winegard W C. Acta Metall, 1958; 6:283 |
[4] | Drolet J P, Galibois A. Acta Metall, 1968; 16:1387 |
[5] | Gordon P, El-Bassyouni T A. Trans Am Inst Min Eng,1965; 233:391 |
[6] | Anderson M P, Srolovitz D J, Grest G S, Sahni P S. Acta Metall, 1984; 32:783 |
[7] | Srolovitz D J, Anderson M P, Sahni P S, Grest G S. Acta Metall, 1984; 32:793 |
[8] | Radhakrishnan B, Zacharia T. Metall Mater Trans, 1995;26A: 167 |
[9] | Liu G Q, Song X Y, Yu H B, Gu N J. Acta Metall Sin,1999; 35:245(刘国权,宋晓艳,于海波,谷南驹.金属学报,1999;35:245) |
[10] | Song X Y, Liu G Q. J Mater Sci Technol, 1998; 14:506 |
[11] | Guan X J, Zhou J J, Chen X M, Li Y, Ma J. Heat Treat Met, 2003; 28(2): 31(关小军,周家娟,陈晓闽,李阳,马璟.金属热处理,2003;28(2):31) |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%