利用Gleeble-3500热模拟试验机研究了T122耐热钢在900-1200 ℃,应变速率为10-2-101 s-1条件下的热压缩变形行为采用应变硬化速率-应力(θ-σ)曲线图较精确地获得了饱和流变应力和峰值应力;用回归法确定了双曲线本构方程中的变形激活能及材料常数,确定了T122钢在饱和应力和峰值应力条件下的变形激活能分别为570和548 kJ/mol;采用力学方法直接从流变曲线确定了T122钢发生动态再结晶的临界应变量,并回归出临界应变量与Zener-Hollomon参数的关系式.
参考文献
| [1] | Fujimitu M.ISIJ Int,2001; 41:612 |
| [2] | Niu J T.Physical Simulation Technology of Materials During Hot Processing.Beijing:National Defence Press,1999:149(牛济泰.材料和热加工领域的物理模拟技术.北京:国防工业出版社,1999:149) |
| [3] | Davenport S B,Silk N J,Sellars C M.Mater Sci Technol,2000; 16:539 |
| [4] | Sellars C M.In:Krausz G,ed.,Deformation Processing and Structure,Metals Park,OH:ASM,1983:245 |
| [5] | McQueen H J,Yue S,Ryan N D,Fry E.J Mater Process Technol,1995; 53:293 |
| [6] | McQueen H J,Yue S,Ryan N D.Mater Sci Eng,2002;A322:43 |
| [7] | Medina S F,Hernandez C A.Acta Mater,1996; 44:137 |
| [8] | Carsí M,Allende R,Pe(n)alba F,Jiménez J A,Ruano O A.Steel Res Int,2004; 75(1):26 |
| [9] | Zhu F X,Liu C,Wang P,Gao D F,Gao C,Zhu C Q,Ni G Z.Steel Pipe,1999; 28(1):8(朱伏先,刘川,王平,高德福,高潮,祝春清,倪国政.钢管,1999;28(1):8) |
| [10] | Pe(n)alba F,Carsí M,Larrea M T,Ruano O A,Allende R.In:14th Rolling Conf,San Nicolas,Buenos Aires,Argentina:Instituto Argentino de Siderurgia,2002:383 |
| [11] | Imbert C,Ryan N D,McQueen H J.Metall Trans,1984;15A:1855 |
| [12] | Poliak E I,Jonas J J.Acta Mater,1996; 44:127 |
| [13] | Zahiri S D,Davies C H G,Hodgson P D.Scr Mater,2005;52:299 |
| [14] | Imbert C A C,McQueen H J.Mater Sci Eng,2001; A313:104 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%