{"currentpage":1,"firstResult":0,"maxresult":10,"pagecode":5,"pageindex":{"endPagecode":5,"startPagecode":1},"records":[{"abstractinfo":"为了进一步了解晶须对镁基复合材料耐腐蚀性能的影响,采用硼酸镁晶须制备了不同晶须含量的AZ91D镁基复合材料.采用电化学工作站测量了镁基复合材料在5％Na2SO4溶液中的开路电位、动电位极化曲线和交流阻抗谱,利用扫描电镜观察了不同晶须含量的镁基复合材料经Na2SO4浸泡腐蚀后的微观组织形貌,研究了晶须体积分数对镁基复合材料耐腐蚀性能的影响.结果表明:经Na2SO4腐蚀后,镁基复合材料表面生成了一层晶须增韧的腐蚀产物膜,增强了镁基复合材料的耐腐蚀性能;随着晶须体积分数的增加,镁基复合材料的耐腐蚀性逐渐提高.","authors":[{"authorName":"王晓民","id":"ce6164bd-795e-4c86-9b6f-57961ef9a27e","originalAuthorName":"王晓民"},{"authorName":"邱彦星","id":"f5c33bc5-0efe-43b8-a7df-c852f7d6166f","originalAuthorName":"邱彦星"},{"authorName":"王丙军","id":"b71cf4e8-e42e-48c3-a871-0c4b92206e2c","originalAuthorName":"王丙军"},{"authorName":"喇培清","id":"cd4373e9-bedf-468e-844f-140d66aecb1d","originalAuthorName":"喇培清"},{"authorName":"程楚","id":"5fad3393-811f-4827-a2b4-6294e638df6b","originalAuthorName":"程楚"},{"authorName":"张延安","id":"4bb0be8e-b9ce-43f4-949f-51baa858fb83","originalAuthorName":"张延安"}],"doi":"","fpage":"15","id":"452b5438-1c99-424d-9974-63740a626221","issue":"5","journal":{"abbrevTitle":"CLBH","coverImgSrc":"journal/img/cover/CLBH.jpg","id":"7","issnPpub":"1001-1560","publisherId":"CLBH","title":"材料保护"},"keywords":[{"id":"84c9174e-05d7-4003-bfa2-1222f65f54bd","keyword":"硼酸镁晶须","originalKeyword":"硼酸镁晶须"},{"id":"4a68c1b3-8724-463b-bee2-196375f6b4e5","keyword":"镁基复合材料","originalKeyword":"镁基复合材料"},{"id":"2a91d21c-6f02-47a8-ba0a-0872e2ccb33c","keyword":"电化学腐蚀","originalKeyword":"电化学腐蚀"},{"id":"f4b4a701-8614-4409-94c7-65dab484f906","keyword":"耐蚀性","originalKeyword":"耐蚀性"}],"language":"zh","publisherId":"clbh201605005","title":"硼酸镁晶须含量对AZ91D镁基复合材料在SO42-溶液中腐蚀行为的影响","volume":"49","year":"2016"},{"abstractinfo":"用能谱、X射线衍射、X射线荧光光谱和金相等分析手段,研究九连墩楚墓出土的战国青铜文物的铅锡焊料的基体和锈蚀产物,发现产物致密、均匀,主要由PbCO3、Pb和SnO2组成.整个埋藏环境相对密闭,总体呈中性,HCO-3浓度较高.这些因素共同作用,减缓了铅锡焊料的腐蚀,使大部分青铜器完好地保存了下来.","authors":[{"authorName":"金普军","id":"8fdc5f02-3995-4376-808c-04d4026544c8","originalAuthorName":"金普军"},{"authorName":"秦颍","id":"8842d6b0-02ae-473d-ac31-58c8836c01e6","originalAuthorName":"秦颍"},{"authorName":"龚明","id":"7dd3032e-29f2-4272-b61f-5ff00d976b9b","originalAuthorName":"龚明"},{"authorName":"李涛","id":"db706bcf-d9d4-44be-805b-6b572d4e9b11","originalAuthorName":"李涛"},{"authorName":"朱铁权","id":"304beca0-e4b1-4ca7-aa7a-4f93cffc3118","originalAuthorName":"朱铁权"},{"authorName":"胡雅丽","id":"ce3f5271-0e3e-4147-ba58-ba0d92c3f625","originalAuthorName":"胡雅丽"},{"authorName":"王昌燧","id":"b25f3251-bee6-4440-9217-7a83a30576e4","originalAuthorName":"王昌燧"}],"doi":"10.3969/j.issn.1005-4537.2007.03.008","fpage":"162","id":"54f3d8d0-db11-4683-a341-f2c50f9eb91d","issue":"3","journal":{"abbrevTitle":"ZGFSYFHXB","coverImgSrc":"journal/img/cover/中国腐蚀封面19-3期-01.jpg","id":"81","issnPpub":"1005-4537","publisherId":"ZGFSYFHXB","title":"中国腐蚀与防护学报"},"keywords":[{"id":"20c32edf-e58f-48e4-9ee8-5b35e2e5c51a","keyword":"金属文物","originalKeyword":"金属文物"},{"id":"f2a047e6-faf8-4c40-8d09-f1fbd63cb138","keyword":"土壤腐蚀","originalKeyword":"土壤腐蚀"},{"id":"31033174-fea3-4497-b7b4-dd2e05718357","keyword":"铅锡焊料","originalKeyword":"铅锡焊料"},{"id":"00fb4238-0fbe-485c-a0a1-906d1000b6ea","keyword":"青铜器","originalKeyword":"青铜器"}],"language":"zh","publisherId":"zgfsyfhxb200703008","title":"九连墩楚墓青铜器铅锡焊料的耐腐蚀机理","volume":"27","year":"2007"},{"abstractinfo":"青海省沱沱河楚多曲铅锌银矿床是近几年发现并正在勘查的大型铅锌矿床。利用Linkam（林克姆） THMS600型冷-热台对其主要蚀变矿物重晶石流体包裹体的进行了测试。结果表明，包裹体主要以纯液相及气液二相为主，气液二相流体包裹体的均一温度在170～220℃，盐度为4％～12％，成矿流体密度为0．92～0．98 g/cm3，成矿压力为11～22 MPa，估算成矿深度为1．1～2．2 km。综合研究认为，楚多曲铅锌银矿床是与中酸性岩脉密切相关的、浅成中低温热液脉型矿床。","authors":[{"authorName":"陈生彦","id":"5bd6ba99-35df-45e5-8335-de9ec583840c","originalAuthorName":"陈生彦"},{"authorName":"湛守智","id":"996f85dd-6df6-4e83-9c04-60d62910e3e5","originalAuthorName":"湛守智"},{"authorName":"姚旭东","id":"a9cb5c6f-3fc9-47cf-bd34-fb13eca713d5","originalAuthorName":"姚旭东"},{"authorName":"景向阳","id":"2a163077-f9e1-4bd8-9f3f-e2a5cd71a807","originalAuthorName":"景向阳"}],"doi":"10.11792/hj20141006","fpage":"30","id":"559c2a16-c3d1-4a92-9cf0-3477d8a4c811","issue":"10","journal":{"abbrevTitle":"HJ","coverImgSrc":"journal/img/cover/HJ.jpg","id":"44","issnPpub":"1001-1277","publisherId":"HJ","title":"黄金"},"keywords":[{"id":"b089d63d-170c-461d-b571-3f63eaceaf2b","keyword":"楚多曲铅锌银矿床","originalKeyword":"楚多曲铅锌银矿床"},{"id":"65883cb0-b1fd-4f5d-9a08-4fa1f7ae6b71","keyword":"流体包裹体","originalKeyword":"流体包裹体"},{"id":"1e790710-dd01-48e1-819e-e35c332212a8","keyword":"矿床成因","originalKeyword":"矿床成因"},{"id":"2c52c413-e9dc-47c0-b108-c2e84208c41f","keyword":"浅成中低温热液脉型矿床","originalKeyword":"浅成中低温热液脉型矿床"}],"language":"zh","publisherId":"huangj201410007","title":"青海沱沱河楚多曲铅锌银矿床流体包裹体特征及矿床成因","volume":"","year":"2014"},{"abstractinfo":"用能谱、X射线衍射、X射线荧光光谱和金相等分析手段，研究了九连墩楚墓出土的战国青铜文物的铅锡焊料的基体和锈蚀产物、发现产物致密、均匀，主要由PbCO3、Pb和SnO2组成，整个埋藏环境相对密闭，总体呈中性，HCO3-浓度较高。这些因素共同作用，减缓了铅锡焊料的腐蚀，使用大部分青铜器完好地保存了下来。","authors":[{"authorName":"金普军","id":"4c16cd2f-ee9d-4aa3-a52b-2f0800b7856e","originalAuthorName":"金普军"},{"authorName":"秦颖","id":"0c85e37c-f3dc-4230-a769-14680be2b330","originalAuthorName":"秦颖"},{"authorName":"龚明","id":"cb003f00-379a-4293-a86d-c84aaec3475e","originalAuthorName":"龚明"}],"categoryName":"|","doi":"","fpage":"162","id":"879c957f-dae2-48be-801c-a4d19fd9de5a","issue":"3","journal":{"abbrevTitle":"ZGFSYFHXB","coverImgSrc":"journal/img/cover/中国腐蚀封面19-3期-01.jpg","id":"81","issnPpub":"1005-4537","publisherId":"ZGFSYFHXB","title":"中国腐蚀与防护学报"},"keywords":[{"id":"c68487e8-60c8-417d-91ac-cbb2a472c912","keyword":"金属文物","originalKeyword":"金属文物"},{"id":"782a66d7-d6fa-4586-9f81-e1fe907b9897","keyword":"soil corrosion","originalKeyword":"soil corrosion"},{"id":"b53da343-21bb-48e0-a766-5c3d06624e8b","keyword":"Pb-Sn alloy","originalKeyword":"Pb-Sn alloy"},{"id":"c65fbb5a-c1ad-4054-8c4b-63a401325572","keyword":"Pb corrosion","originalKeyword":"Pb corrosion"},{"id":"6e216fb3-2655-4abb-bbab-019323f7332e","keyword":"Sn corrosion","originalKeyword":"Sn corrosion"}],"language":"zh","publisherId":"1005-4537_2007_3_12","title":"湖北枣阳九连墩战国楚墓青铜器铅锡焊料的腐蚀机理探讨","volume":"27","year":"2007"},{"abstractinfo":"介绍了一种斜程有限距离上大气相干长度的测量系统和方法,用系留气球搭载一个点光源,在地面用差分像运动测量法测量光波到达角起伏方差来确定实时的斜程大气相干长度值,与湍流廓线测量实验进行了对比,实验结果分析光学湍流廓线积分与相干长度仪测量二者的相关性较好.","authors":[{"authorName":"汪建业","id":"97ceb89e-1af2-4dde-a742-37f7281005c0","originalAuthorName":"汪建业"},{"authorName":"刘晓春","id":"2eef0b42-2a23-4445-9864-95e44b647c8c","originalAuthorName":"刘晓春"},{"authorName":"翁宁泉","id":"6cea0205-90b4-4be5-b8b8-14bc99c9213a","originalAuthorName":"翁宁泉"},{"authorName":"吴毅","id":"73465684-2384-452a-94b6-0976385e1575","originalAuthorName":"吴毅"}],"doi":"10.3969/j.issn.1007-5461.2005.03.035","fpage":"477","id":"12b35d86-c7e4-4126-8535-3fea08279a7f","issue":"3","journal":{"abbrevTitle":"LZDZXB","coverImgSrc":"journal/img/cover/LZDZXB.jpg","id":"53","issnPpub":"1007-5461","publisherId":"LZDZXB","title":"量子电子学报 "},"keywords":[{"id":"4f630056-ab8b-438b-92a2-5ccc331426de","keyword":"大气光学","originalKeyword":"大气光学"},{"id":"f406a320-b4fc-499c-80ec-95a21bc45b1c","keyword":"大气传输","originalKeyword":"大气传输"},{"id":"f94334f1-8160-4364-9f2c-5b64b2d58ac8","keyword":"大气相干长度","originalKeyword":"大气相干长度"},{"id":"4e804b66-f8aa-44e4-b368-0a6c36313fff","keyword":"斜程测量","originalKeyword":"斜程测量"}],"language":"zh","publisherId":"lzdzxb200503035","title":"斜程路径大气相干长度的测量","volume":"22","year":"2005"},{"abstractinfo":"建立了一种蠕变持久统一方程和热强参数统一方程,它不但将目前常用的拉森-米勒(L-M)方程、葛-唐吾(G-D)方程、曼森-索柯普(M-S)方程和曼森-哈弗特(M-H)方程统一表达为一个方程,而且还能很好地表征工程中许多用上述四种方程无法描述的材料蠕变断裂时间、应力和温度之间的关系.所以,与现行规范中推荐的这四种蠕变持久方程相比,统一方程具有对试验数据的拟合精度高、适用性强等优点.","authors":[{"authorName":"张少波","id":"fac1f2b7-9a95-418e-b092-3bad057456a9","originalAuthorName":"张少波"},{"authorName":"傅惠民","id":"e0c8dcbd-f0f3-4d70-bfdb-663aff2f3b27","originalAuthorName":"傅惠民"},{"authorName":"张应福","id":"be079a08-c48f-4646-8a5b-0e0a67c6eb59","originalAuthorName":"张应福"}],"doi":"10.3969/j.issn.1001-4381.2000.12.003","fpage":"8","id":"512c7565-90cc-47f2-9738-264d2ddab47d","issue":"12","journal":{"abbrevTitle":"CLGC","coverImgSrc":"journal/img/cover/CLGC.jpg","id":"9","issnPpub":"1001-4381","publisherId":"CLGC","title":"材料工程"},"keywords":[{"id":"ef6934b7-db75-4b25-a316-2bc95f2f1c6f","keyword":"蠕变","originalKeyword":"蠕变"},{"id":"5a40efcb-f29d-4300-bdf4-b4f89105018c","keyword":"持久强度","originalKeyword":"持久强度"},{"id":"58ab7a60-5795-4277-8ed4-e9e05b2304eb","keyword":"持久方程","originalKeyword":"持久方程"}],"language":"zh","publisherId":"clgc200012003","title":"蠕变持久统一方程","volume":"","year":"2000"},{"abstractinfo":"对新型纵流壳程换热器壳程近壁局部区域的流场和温度场进行了数值模拟研究,总结了换热器横截面内各换热管壁面对流传热系数与换热管距壳体轴心距离的关系,分析了近壁区域非规则流道内流体对流传热系数较壳体中心主流区内规则流道大的原因,为换热器壳程内关键局部区域流体流动和传热状况的改善以及进一步的结构优化提供了直观依据.提出的纵流壳程换热器周期性全截面计算模型,为发现和解决换热器中与局部位置流体流动和传热细节相关的深层次问题提供了良好的辅助手段.","authors":[{"authorName":"古新","id":"8b032d36-1173-42a0-8775-be4061c3c628","originalAuthorName":"古新"},{"authorName":"董其伍","id":"24a46f93-fadb-4669-aecd-c6cf6649ff62","originalAuthorName":"董其伍"},{"authorName":"王珂","id":"573b004b-d3f3-4de3-b8b7-2667bfec094e","originalAuthorName":"王珂"}],"doi":"","fpage":"683","id":"ca7c5b70-d8d4-4843-ac3b-2a070ed913c6","issue":"4","journal":{"abbrevTitle":"GCRWLXB","coverImgSrc":"journal/img/cover/GCRWLXB.jpg","id":"32","issnPpub":"0253-231X","publisherId":"GCRWLXB","title":"工程热物理学报 "},"keywords":[{"id":"d390c710-14f9-4905-af02-849990734be1","keyword":"纵流壳程换热器","originalKeyword":"纵流壳程换热器"},{"id":"fcc6baaa-74b1-4a47-a1fd-672c26903f90","keyword":"流场","originalKeyword":"流场"},{"id":"a38e2bed-2688-4eb8-bb88-f74b12408c58","keyword":"温度场","originalKeyword":"温度场"},{"id":"dbb08a3f-ad6b-4daa-9cf4-9e72b1e78d44","keyword":"局部特性","originalKeyword":"局部特性"},{"id":"cfaff21a-d5b2-4f7d-af65-258a9b52d242","keyword":"数值模拟.","originalKeyword":"数值模拟."}],"language":"zh","publisherId":"gcrwlxb200904038","title":"纵流壳程换热器壳程近壁区流场和温度场数值研究","volume":"30","year":"2009"},{"abstractinfo":"论述了多轧程电动压下生产过程中,采用综合等储备原理计算优化规程,进行板宽和板厚控制的可行性及其效果,通过安钢2800 mm轧机上的工程实践,证明该方法是行之有效的.","authors":[{"authorName":"白埃民","id":"18be5ce3-7c83-4b0c-8501-dbcaaf1c9797","originalAuthorName":"白埃民"},{"authorName":"裴晓东","id":"42472321-c793-443c-be4a-5ca53248b471","originalAuthorName":"裴晓东"},{"authorName":"张进之","id":"ac025c10-2379-46a7-9c69-03bae6da73ce","originalAuthorName":"张进之"},{"authorName":"赵济秀","id":"f5391a12-67d3-451a-9bae-d7be0fcd820c","originalAuthorName":"赵济秀"},{"authorName":"欧阳瑜","id":"038dfced-1188-4713-933e-e8bbec0640f5","originalAuthorName":"欧阳瑜"}],"doi":"","fpage":"30","id":"51679445-2e48-474d-83a3-74837d5a860f","issue":"4","journal":{"abbrevTitle":"GT","coverImgSrc":"journal/img/cover/GT.jpg","id":"27","issnPpub":"0449-749X","publisherId":"GT","title":"钢铁"},"keywords":[{"id":"583e2e1b-cf76-48b5-8662-7a2546eb5366","keyword":"优化","originalKeyword":"优化"},{"id":"dd9c60b4-2d1a-41b8-876d-5da215ba6af8","keyword":"等储备","originalKeyword":"等储备"},{"id":"498eb5c1-be8b-4905-aa34-25cd32cdc27b","keyword":"规程","originalKeyword":"规程"},{"id":"8f1c6b7c-d176-4c40-bf48-946cac6b2ae2","keyword":"多轧程","originalKeyword":"多轧程"},{"id":"9f78e6f6-d388-4f74-9a06-74096b7fc22e","keyword":"电动压下","originalKeyword":"电动压下"}],"language":"zh","publisherId":"gt199904008","title":"电动压下多轧程优化规程的实现","volume":"","year":"1999"},{"abstractinfo":"论述了铁精矿造球的基本工艺技术要求,根据武钢程潮铁矿的原料条件,利用该矿球团生产线上φ6000mm圆盘造球机,通过调整造球盘转速、倾角、给料量等技术参数,改变加水地点及加水方式,强化制粒效果,提高了生球成球率及台时产量,生球合格率提高了26.79%～39.77%,台时产量达到30 t/h.","authors":[{"authorName":"唐方家","id":"e4c0dcaf-a0e2-40ad-a48e-53ca072ff027","originalAuthorName":"唐方家"},{"authorName":"黄桂香","id":"6b8b324d-4497-4c7a-920e-08198f2d3dc7","originalAuthorName":"黄桂香"}],"doi":"","fpage":"19","id":"175ecb36-566f-4531-bc2e-9e874d722b4f","issue":"2","journal":{"abbrevTitle":"GT","coverImgSrc":"journal/img/cover/GT.jpg","id":"27","issnPpub":"0449-749X","publisherId":"GT","title":"钢铁"},"keywords":[{"id":"a0683c31-99a6-49f5-a8a7-1ee6faf75214","keyword":"铁精矿","originalKeyword":"铁精矿"},{"id":"6e2c791c-5ee8-4527-b6d1-bd6da37224d4","keyword":"造球","originalKeyword":"造球"},{"id":"9d6d090e-4e3f-4123-b462-85a77c2132cb","keyword":"工艺参数","originalKeyword":"工艺参数"},{"id":"ea838259-3898-4003-b084-6c8699b34c80","keyword":"成球率","originalKeyword":"成球率"}],"language":"zh","publisherId":"gt200602005","title":"程潮铁矿氧化球团造球实践","volume":"41","year":"2006"},{"abstractinfo":"结合武钢程潮铁矿矿区截排洪续建工程,运用岩土数值分析软件对各类围岩条件下隧洞开挖及支护结构进行数值模拟.并确定隧洞合理的开挖与最优的支护方案.在保证隧洞安全的前提条件下,合理地进行支护设计与施工,尽量节约工程造价和工程投资,保证截排洪工程尽早完成.","authors":[{"authorName":"龚智敏","id":"7946836d-4438-4bb9-bceb-89eff28ba6a5","originalAuthorName":"龚智敏"},{"authorName":"许梦国","id":"c7d90ba8-fdf4-4c09-afba-e4bef2e2055b","originalAuthorName":"许梦国"},{"authorName":"王平","id":"f33c079e-3b06-418a-bc01-8d32bd9d64e3","originalAuthorName":"王平"},{"authorName":"姚高辉","id":"e716bfbe-71d9-41a0-b14f-e0aedf7495ea","originalAuthorName":"姚高辉"}],"doi":"10.3969/j.issn.1001-1277.2008.10.006","fpage":"22","id":"e61f4b7c-f640-4710-b1b8-1ea762ebf3d4","issue":"10","journal":{"abbrevTitle":"HJ","coverImgSrc":"journal/img/cover/HJ.jpg","id":"44","issnPpub":"1001-1277","publisherId":"HJ","title":"黄金"},"keywords":[{"id":"69b9b420-0a9f-4dce-943b-e0bf401e41bc","keyword":"BQ岩体分级","originalKeyword":"BQ岩体分级"},{"id":"54248205-6006-468a-86f0-85acc0783ced","keyword":"隧洞支护","originalKeyword":"隧洞支护"},{"id":"9deb93c6-9868-4dbe-a0b1-2a36592a2985","keyword":"数值分析","originalKeyword":"数值分析"},{"id":"b60a0212-b945-4a19-8fed-6aed2683e495","keyword":"支护优化","originalKeyword":"支护优化"},{"id":"77ecd9fc-06c0-4bda-a4cb-cda6cdcdd1e1","keyword":"程潮铁矿","originalKeyword":"程潮铁矿"}],"language":"zh","publisherId":"huangj200810006","title":"程潮铁矿截排洪隧洞支护优化研究","volume":"29","year":"2008"}],"totalpage":40,"totalrecord":394}