采用SEM,EDS和XRD研究了几种Mg-Al-Zn合金的成分、相组成与凝固路径的关系.结果表明,Mg-Al-Zn合金的相组成与Zn/Al质量比有关;随着Zn/Al比值的增加,第二相γ Mg_(17)Al_(12)的数量减少,逐渐被φ-Mg_(21)(Zn,Al)_(17)取代,直至完全消失.通过搜集合金中町能存在的各相的热力学模型,运用Pandat热力学计算软件平台,计算并比较了平衡和非平衡(Scheil模型及金属型铸造)条件下合金的成分、相组成与凝固路径的关系.结果表明,金属型铸造的凝固过程偏离平衡凝固过程,Scheil模饿很好地解释了大多数合金铸造组织的相组成;但是由于Scheil模型不考虑有同相作为反应物参与的包晶反应,对ZA65合金凝固路径和相组成的预测结果与实际铸造组织的柑组成不符.
Casting Mg-Al-Zn alloys are promising for the automotive components loaded under both high strength and high ductility, as well as under high temperatures. The relationship of com-positions, phase constituents and solidification paths of casting Mg-Al-Zn alloys were investigated by SEM/EDS, XRD and thcrmodynamic calculations. It is shown that the phase constituents of Mg-Al-Zn alloys are related to Zn/Al ratio; with the Zn/Al ratio increasing, the secondary phase γ-Mg_(17)Al_(12) is gradually rcplaced by φ-Mg_(21)(Zn, Al)_(17) and eventually disappears completely. The phase con-stituents and solidification paths of the alloys undcr various conditions, including equilibrium, Scheil and permanent mould casting, were examined by thermodynamic calculation software Pandat with the availability of thermodynamic description of Mg-Al-Zn ternary system. The practical casting process dcviates from the equilibrium; however, the practical phase constituents of the experimental alloys except ZA65 can be predicted by thc Scheil model. Because of no considering the peritectic reaction in which solid participates as reactant, the Scheil model can not correctly predict the phase constituents of ZA65 alloy under permancnt mould casting condition.
参考文献
| [1] | Friedrich H,Schumann S.In:Aghion E,Eliezer D eds.,Proc 2nd lsraeli Int Conf on Magnesium Science and Technology.Israel:Dead Sea,2000:9 |
| [2] | Kim J M,Park B K,Jun J H,Shin K,Kim K T,Jung W J.Mater Sci Eng,2007; A449-451:326 |
| [3] | Vogel M,Kraft O,Dehm G,Arzt E.Scr Mater,2001; 45:517 |
| [4] | Vogel M,Kraft O,Dehm G,Arzt E.Scr Mater,2003; 48:985 |
| [5] | Zhang J,Guo Z X,Pan F S,Li Z S,Luo X D.Mater Sci Eng,2007; A456:43 |
| [6] | Zhang Z,Couture A,Luo A.Scr Mater,1998; 39:45 |
| [7] | Ma Y Q,Chen R S,Han E H.Mater Lett,2007; 61:2527 |
| [8] | Anderseon J O,Guillermet A F,Hillert M,Janseon B,Sundman B.Acta Metall,1986; 34:437 |
| [9] | Dinsdale A T.SGTE Data for Pure Elements.Teddington,UK:National Physics Laboratory,1989:1 |
| [10] | Harding R A,Saunders N J.AFS Trans,1986; 94:451 |
| [11] | Liang P,Tarfa T,Robinson J A,Wagner S,Ochin P,Harmelin M G,Seifert H J,Lukas H L,Aldinger F.Therrn Acta,1998; 314:87 |
| [12] | Foerster G S.Proc IMA 33rd Annual Meeting.Canada:International Magnesium Association,1976:35 |
| [13] | Bourgeois L,Muddle B C,Nie J F.Aeta Mater,2001; 49:2701 |
| [14] | Lee J Y,Kim D H,Lin H K.Mater Lett,2005; 59:3801 |
| [15] | Huang Z H,Liang S M,Chen R S,Han E H.J Alloys Compd,2009; 468:170 |
| [16] | Liang S M,Chen R S,Blandin J J,Suery M,Han E H.Mater Sci Eng,2008; A480:365 |
| [17] | Ohno M,Mirkovic D,Schmid-Fetzer R.Mater Sci Eng,2006; A421:328 |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%