采用柠檬酸做还原剂,硝酸盐做氧化剂,利用溶胶-凝胶低温燃烧合成工艺制备了纳米晶Ce0.8Y0.22O1.9固溶体.用TG/DTA、XRD、FTIR、Raman和TEM等检测手段研究了柠檬酸用量、前驱体溶液的pH值、氧化剂的用量等工艺参数对凝胶的形成、分解及产物特性的影响.结果表明,通过控制柠檬酸的用量、溶液的pH值,可以获得稳定的凝胶.改变氧化剂的用量,可以获得颗粒尺寸在5~40nm范围的超细粉体.Raman研究表明,随氧化剂含量的增加,氧空位浓度增大.
参考文献
[1] | Chan S H,Chen X J,Khor K A.Solid State Ionics,2003,158:29-43. |
[2] | Boulc'h F,Djurado E.Solid State Ionics,2003,157:335-340. |
[3] | Huang K,Goodenough J B.J.Alloys Compd,2000,303-304:454-464. |
[4] | Marina O A,Bagger C,Primdahl S,et al.Solid State Ionics,1999,123:199-208. |
[5] | Tsoga A,Naoumidis A,Stover D.Solid State Ionics,2000,135:403-409. |
[6] | Piacente V,Bardi G,Maluspina L,et al.Journal of Chemical Physics,1973,59:31-36. |
[7] | Herna(A) ndez,Jurado M T,Dura(A) n J R,et al.Solid State Ionics,1992,50:167-173. |
[8] | Yashima M,Kakihana M,Ishii K,et al.J.Mater.Res.,1996,11:1410-1420. |
[9] | Yashima M,Ohtake K,Kakihana M,et al.J.Mater.Sci.Lett.,1994,13:1564-1566. |
[10] | Caruso R,Benav(o)A E,Sanctis O,et al.J.Mater.Res.,1997,12:2594-2601. |
[11] | Chatterjee M,Chatterjee A,Ganguli D.Ceramics International,1992,18:43-49. |
[12] | Tsoga A,Naoumidis A,Stover D.Solid State Ionics,2000,135:403-409. |
[13] | Biamino S,Badini C.Journal of the European Ceramic Society,2004,24:3021-3034. |
[14] | Torrens R S,Sammes N M,Tompsett G A.Solid State Ionics,1998,111:9-15. |
[15] | Li Fei,Hu Keao,Li Jianlin,et al.J.Nucl.Mater.,2002,300:82-88. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%