为了降低成本,以液化石油气作碳源气体,炭毡作增强体,利用多元耦合场CVI方法快速制备了炭/炭复合材料.研究表明,炭纤维预制体在650℃较低温度条件下沉积15h,密度达到了1.71g·cm-3;采用偏光显微镜研究了热解炭的显微结构.结果表明,在同一试样中存在粗糙层、光滑层和带状结构的热解炭,并且材料密度均匀性较好.同时分析了致密化的工艺过程并讨论了热解炭沉积机理.
参考文献
[1] | Golecki I,Morris R C,Narasimhan D.Method of Rapidly Densifying a porous structure[P].US Patent 5348774,1994. |
[2] | Bruneton E,Narcy B,Oberlin A.Carbon,1997,35:1593-1598. |
[3] | Granoff B,Pierson H O,Schuster D M.Carbon,1973,11:177-187. |
[4] | TANG Zhong-hua,ZOU Zhi-qiang,XIONG Jie.Carbon,2003,41:2703-2710. |
[5] | Houdayer M,Spitz J,Tran V D,et al.Process for the densification of a porous structure[P].US Patent 4472454,1984. |
[6] | 孙万昌,李贺军,陈三平(SUN Wan-chang,et al).无机材料学报(Journal of Inorganic Materials),2003,18(1):121-128. |
[7] | John Ofori Y,Stratis V Sotirchos.Electrochem.Soc.,1997,144(1):274-289. |
[8] | Hyeok Je Jeong,Hee Dong Park,et al.Carbon,1996,34(3):417-421. |
[9] | 刘文川,邓景屹.材料导报,2000,14(4):59-60. |
[10] | 谢志勇,黄启忠,苏哲安,等(XIE Zhi-yong,et al).无机材料学报(Journal of Inorganic Materials),2005,20(5):1201-1207. |
[11] | 谢志勇,黄启忠,苏哲安,等.复合材料学报,2005,22(4):47-52. |
[12] | Yan Gui-Shen,Li He-Jun,Hao Zhi-Biao.Acta Physica Sinica,2002,51(2):326-331. |
[13] | Maquin B,Goyheneche J-M,Derre A,et al.J.Phys.D Appl.Phys.,2000,33:8-17. |
[14] | Xavier Bourrat,Jerome Lavenac,Francis Langlais,et al.Carbon,2001,39:2376-2380. |
[15] | Granff B.Carbon,1974,12:405-416. |
[16] | 潘祖仁,于在璋.自由基聚合.北京:化学工业出版社,1983.14-31. |
[17] | Zhang W G,Hu Z J,Huttinger K J.Carbon,2002,40:2529-2545. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%