本文利用von Karman非线性薄板理论,求解了复合材料中有横向纤维搭桥作用的圆形薄膜脱层的后屈曲问题,获得了桥联脱层均匀扩展的能量释放率和断裂韧性.通过大量的计算和分析得到一个重要结论:搭桥纤维的存在不仅对脱层的初始扩展起到了增韧作用,而且避免了脱层扩展的灾难性.同时定量地给出了搭桥作用对脱层初始扩展的增韧程度,并且确定了桥联脱层扩展稳定与不稳定的分区,对不稳定脱层还给出了失稳扩展的范围及动态效应的估计.
参考文献
[1] | Abrate S. Impact on laminated composites: Recent advances. Appl Mech Rev, 1994, 47:517~544 |
[2] | Chai H, Babcock C D, Knauss W G. One dimensional modeling of failure in laminated plates by delamination buckling. Int J Solids Structures, 1981, 17:1069~1083 |
[3] | Kardomateas G A. The initial post-buckling and growth behavior of internal delaminations in composite plates. J Appl Mech, 1993, 60: 903~910 |
[4] | Wan-Lee Yin. Axisymmetric buckling and growth of a circular delamination in a compressed laminate. Int J Solids Structures, 1985, 21: 503~514 |
[5] | Chai H. Three dimensional fracture analysis of thin film debonding. Int J Fract, 1990, 46: 137~256 |
[6] | Cox BN. Delamination and buckling in 3D composites. J Composite Materials, 1994, 28: 1114~1126 |
[7] | Li Siping(李四平), Huang Yuying(黄玉盈), Hu Yuantai(胡元太), Zhong Weifang (钟伟芳). Analysis on buckling and postbuckling of delamination in 3D composites, Acta Mechanica Solida Sinica, 1997, 10(3): 212~219 |
[8] | 李四平, 胡元太, 黄玉盈, 钟伟芳. 3D复合材料中桥联脱层的断裂分析. 固体力学学报, 1997, 18(S): 94~99 |
[9] | Hutchinson J W, Suo Z. Mixed mode cracking in layered materials. Adv Appl Mech, 1992, 29: 63~191 |
[10] | Kardomateas G A, Pelegri A A, Malik B. Growth of internal delaminations under cyclic compression in composite plates. J Mech Phys Solids, 1995, 43: 847~868 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%