在对用断裂镜面法(fracture mirror method)评估纤维就位强度(in-situ strength)的方法进行了评述之后,对此方法进行了修正,即采用纤维束试验确定镜面常数,将标距长度定义为两倍纤维拔出长度与两倍失效长度之和,采用分级平均统计分析方法确定纤维就位强度的Weibull参数和平均强度.采用修正的断裂镜面法,对聚合物先驱体转化法制备的M40JB纤维增强的碳化硅基复合材料中M40JB纤维的就位强度进行了分析,得到了M40JB纤维的Weibull参数和平均强度,并与未修正的断裂镜面法得到的结果进行了比较.
参考文献
| [1] | Singh J P, Singh D. Effects of high-temperature environments on flaw generation and fracture behavior of SiC/SiC composites[J]. Material Science and Engineering A, 1996, 209(1 ):248-250. |
| [2] | Evans A G, Domergue J M, Vagaggini E. Methodology for relating the tensile constitutive behavior of ceramic-matrix compos ire to constituent properties [J]. J Am Cearm Soc, 1994, 77(6): 1425-1435. |
| [3] | Beyerle D S, Spearing S M, Zok F W, et al. Damage and failure in unidirectional ceramic-matrix composites[J]. J Am Ceram Soc, 1992, 75(10):2719-2725. |
| [4] | Eckel A J, Bradt R C. Strength distribution of reinforcing fibers in a Nicalon fiber/chemical vapor infiltrated silicon carbide matrix composite[J]. J Am Ceram Soc, 1989, 72(3):455-458. |
| [5] | Cao H C, Bischoff E, Sbaizero O, Ruhle M, et al. Effect of interfaces on the properties of fiber-reinforced ceramics[J]. J Am Ceram Soc, 1990, 73(6):1691-1699. |
| [6] | Thouless M D, Sbaizero O, Sigl L S, et al. Effect of interface mechanical properties on pullout in a SiC-fiber-reinforced lithium aluminum silicate glass-ceramic[J]. J Am Ceram Soc, 1989, 72 (4):525-532. |
| [7] | Curtin W A. In situ fibers strengths in ceramic-matrix composites from fracture mirrors[J]. J Am Ceram Soc, 1994, 77(4):1075-1078. |
| [8] | Sawyer L C, Chen R T, Haimbach IV F, et al. Thermal stabili ty characterization of SiC ceramic fibers: Ⅱ -Fractography and structure[J]. Ceram Eng Sci Proc, 1986, 7(7～8): 914-930. |
| [9] | Vagaggini E, Domergue J M, Evans A G. Relationships between hysteresis measurements and the constituent properties of ceramic matrix composites: I- Theory[J]. J Am Ceram Soc,1995,78(10): 2709-2720. |
| [10] | Garg S K, Svalbonas V, Gurtman G A. Analysis of structural composite materials, in Chapter 8: Composite Tensile-Strength Models[M]. New York: Marcel Dekker, Inc, 1973. 201-234. |
| [11] | Xia Y M, Yuan J M, Yang B C. A statistical model and experimental study of the strain-rate dependence of the strength of fibers[J]. Composites Sci & Tech, 1994, 52(4): 499-504. |
| [12] | Wang Y, Zhou Y X, Xia Y M. The numerical analysis of stress concentration for brittle matrix composites [J]. Appl CompMater, 2000, 7(1):39-49. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%