建立了缝纫单层板的有效弹性常数分析模型.通过考虑缝纫引起的铺层纤维的面内弯曲和非均匀分布,分析了缝纫参数(如缝纫行距、针距和缝线半径)对等效弹性常数的影响.结果表明,当缝纫方向垂直于铺层纤维方向时,随缝纫行距的减小或缝线半径的增大,纵向模量逐渐下降,而横向模量和剪切模量则逐渐提高;缝纫针距对纵向模量影响很小.
参考文献
| [1] | Kang T J, Lee S H. Effect of stitching on the mechanical and impact properties of woven laminate composite [J]. J of Composites Materials, 1994, 28(16): 1574-1587. |
| [2] | 桂良进,等. 缝纫对复合材料强度和抗冲击性能的影响 [J]. 航空学报,2000, 21(6):368-371. |
| [3] | Mouritz A P, Cox B N. A mechanistic approach to the properties of stitched laminates [J]. Composites Part A, 2000, 31(1): 1-27. |
| [4] | Hawley V. Development of stitched/RTM primary structures of transport aircraft [R]. NASA C95110-3, 1993.25-31. |
| [5] | Pelstring R M & Madan R C. Stitching to improve damage tolerance of composites [A]. In: Proc. 34th Int. SAMPE Symp [C]. 1989, 1519-1528. |
| [6] | Wu E, Wang J. Behavior of stitching laminates under in-plane tensile and transverse impact loading [J]. J of Composite Materials, 1995, 29(17): 2254-2278. |
| [7] | Mouritz A P, Leong K H, Herszberg I. A review of the effect of stitching on the in-plane mechanical properties of fibre-reinforced polymer composites [J]. Composite Part A, 1997, 28A(12): 979-991. |
| [8] | 桂良进. 缝纫层合板基本力学性能和抗冲击性能研究 [D]. 北京:北京航空航天大学,2000.19-31. |
| [9] | Tan P, Tong L, Steven G P. Modelling for predicting the mechanical properties of textile composites-A review [J]. Composites Part A, 1997, 28A(11): 903-922. |
| [10] | Chou T W, Takahashi K. Nonlinear elastic behaviour of flexible fibre composites [J]. Composites, 1987, 18(1): 25-34. |
| [11] | Kuo C M, Takahashi K, Chou T W. Effect of fiber waviness on the nonlinear elastic behaviour of flexible composites [J]. J of composites materials,1988, 22(11): 1004-1025. |
| [12] | Hsiao H M, Daniel I M. Effect of fiber waviness on stiffness and strength reduction of unidirectional composites under compressive loading [J]. Composites Science and Technology, 1996, 56(5): 581-593. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%