通过建立轴对称体胞模型,用数值分析手段研究了在变形速率范围10-4～105/s内,陶瓷颗粒增强铝合金复合材料的压缩塑性流变特征,讨论了不同颗粒形状(圆柱形和球形),不同颗粒体积含量(10%～50%)和不同铝合金基体(LC4、LY12CZ和7075)对金属基复合材料流动应力、应变率敏感性等的影响,构造了可以描述高应变率下金属基复合材料压缩行为的本构模型,并考虑了基体特性、颗粒形状、体积含量及应变率的影响,得出了与试验相吻合的结果.
参考文献
| [1] | Christman T, Needleman A, Nutt S, et al. On microstructural evolution of micromechanical modeling of deformation of a whisker-reinforced metal matrix composite [J]. Mater Sci Engng A, 1989, 107: 49-61. |
| [2] | Friend C M, Nixon A C. Impact response of short S-aluminium fiber/aluminium alloy metal matrix composite [J]. J Mater Sci, 1988, 23: 1967-1975. |
| [3] | Dixon D G. Spall failure in 6061/SiC particulate metal matrix composite [J]. Scripta Metal Mater, 1990, 24(3): 577-580. |
| [4] | Hong S I, Gray Ⅲ G T, Lewandowski J J. Microstructural evolution in an Al-Zn-Mg-Cu alloy-20 vol% SiC composite shock-loaded to 5 GPa [J]. Scripta Metal Mater, 1992, 27:431-436. |
| [5] | Marchand A, Duffy J, Christman T A, et al. An experimental study of the dynamic mechanical properties of an Al-SiCw composite [J]. Engng Fract Mech, 1998, 30(3): 295-315. |
| [6] | 黄晨光,段祝平,吕毓雄,等.MMCs的冲击力学性能及拉压不对称性的研究[J].复合材料学报,2001,18(1):102-127. |
| [7] | Vaziri R, Delfosse D, Pageau G, et al. High-speed impact response of particulate metal matrix composite material--An experimental and theoretical investigation [J]. Int J Impact Engng, 1993, 13: 329-352. |
| [8] | Hong S I, Gray Ⅲ G T. Dynamic mechanical response of a 1060Al/Al2O3 composite [J]. J Mater Sci, 1994, 29: 2987-2992. |
| [9] | Chichili D R, Ramesh K T. Dynamic failure mechanisms in a 6061-T6 Al/Al2O3 metal-matrix composite [J]. Int J Solids Struct, 1995, 32(17/18): 2609-2626. |
| [10] | Weissenbek E, Bohm H J, Rammerstorfer F G. Micromechanical investigations of arrangement effects in particle reinforced metal matrix composites [J]. Comput Meter Sci, 1994,3: 263-278. |
| [11] | Song SG, Shi N, Gray Ⅲ G T, et al. Reinforcement shape effects on the behavior and ductility of particulate-reinforced 6061-Al matrix composites [J]. Metal Mater, 1996, 27A:3739-3746. |
| [12] | ABAQUS (2001) User Manual. Version 6. 1-1, Hubbitt,Karlsson and Sorensen, Inc. |
| [13] | Li Y, Ramesh K T. Influence of particle volume fraction,shape, and aspect ratio on the behavior of particle-reinforced metal-matrix composites at high rates of strain [J]. Acta Mater,1998,46(16):5633-5645. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%