应用上限法建立了对称复合板冷轧变形模式的数学模型,在此基础上对软复层复合板在不同条件下冷轧时的变形模式进行了计算,给出了相关计算曲线.计算结果表明,依过程参数的不同,软复层复合板冷轧时存在比例变形、界面撕开及不稳定变形三种可能的变形模式.加工率越大、界面结合强度越高、基体材料的相对强度和复合板轧后的相对厚度越小,则均匀变形区越大,界面撕开区越小.不稳定变形区仅在基体材料的相对厚度和相对强度足够大时才存在.
参考文献
| [1] | 青木,隆平.积层板の层间应力と层间剥离[J].日本?合材料会?,1995,21(4):123-129. |
| [2] | Kim J K,Yu J X. Forming and failure behavior of coated,laminated and sandwiched sheet metals[J]. J Mat Proc Tech,1997,63(1):33-42. |
| [3] | Shirota T, Dendo T.Some experiments on clad rolling by planetary mill in cold stage[J]. JSTP,1983,24(1):53-58. |
| [4] | 木内学,黄永茂. 非对称?合压延の解析モデル[J]. 塑性と加工,1989,30(9):1308-1315. |
| [5] | Kiuchi M,Hwang Y M,Shitani K. Analysis and experiment on sandwich sheet rolling[J]. JSTP,1990,31(12):1445-1450. |
| [6] | Hwang Y M,Chen T H,Hsu H H. Analysis of asymmetrical clad sheet rolling by stream function method[J]. Int J Mech Sci,1996,38(4):443-460. |
| [7] | Hwang Y M,Hsu H H,Hwang Y L. Analytical and experime-ntal study on bonding behavior at the roll gap during complex rolling of sandwich sheets[J]. Int J Mech Sci,2000,42(12):2417-2437. |
| [8] | Hwang Y M,Hsu H H,Lee H J. Analysis of plastic instability during sandwich sheet rolling[J]. Int J Mach Tools Manufact,1996,36(1):47-62. |
| [9] | Tzou G Y. Theoretical study on the cold sandwich rollingconsidering coulomb friction[J]. J Mat Proc Tech,2001,114(1):41-50. |
| [10] | Avitzer B. Handbook of Metal-Forming Process[M]. New York:John Wiley & Sons Inc,1983. 783-787. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%