通过开发计算机程序与有限元/控制体积分析软件,能够实现对任意复杂三维形状复合材料构件的造型和RTM工艺充模过程的模拟.研究了改变工艺参数时工字孔平板的RTM工艺模拟结果和实验结果,两者基本保持一致;证明了恒压注射情况下,充模时间与注射压力、渗透率成反比,与树脂粘度成正比;也证实了该模拟软件确实可用于预测树脂流动模式以及成型效率,为RTM实际工艺设计与优化提供了有效的技术手段.
参考文献
| [1] | 尹明仁,段跃新,李丹,梁志勇,张佐光.视窗化RTM工艺冲模过程模拟仿真技术研究[J].复合材料学报,2000,18 (4):17-22. |
| [2] | 秦伟,李海晨,张志谦,吴晓宏.RTM工艺树脂流动过程数值模拟及试验比较[J].复合材料学报,2003,20(4):77-80. |
| [3] | Gokee A, Hsiao K T, Advani S G. Branch and bound search to optimize injection gate locations in liquid composite molding process[J]. Composites Part A, 2002, 33:1263-1272. |
| [4] | Shojaei A, Ghaffarian S R, Karimian S M H. Numerical simulation of three-dimensional mold filling processing in resin transfer molding using quasi-steady state and partial saturation formulation[J]. Composites Science and Technology, 2002,62: 861-879. |
| [5] | Bickerton S, Stadtfeld H C, Steiner K V, Advani S G. Design and application of actively controlled injection schemes for resin-transfer molding[J]. Composites Science and Technology, 2002,61: 1625-1637. |
| [6] | Lin M Y, Murphy M J, Hahn H T. Resin transfer molding processing optimization[J]. Composites Part A, 2000,31:361-371. |
| [7] | Bickerton S, Sozer E M, Graham P J, Advani S G. Fabric structure and mold curvature effects on perform permeability and mold filling in the RTM process[J]. Composites Part A, 2000,31:423-438. |
| [8] | 江顺亮.RTM加工工艺冲模过程的计算机模拟[J].复合材料学报,2002,19 (2):13-17. |
| [9] | 李海晨,王彪,周振功.RTM工艺树脂流动过程数值模拟[J].复合材料学报,2002,19 (2):18-23. |
| [10] | 吕昶,薛元德.RTM工艺冲模过程数值模拟及试验比较[J].复合材料学报,1999,16 (1):131-136. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%