利用扫描和透射电子显微镜及X-rays衍射仪等,对ZrO2层状复合陶瓷的显微形貌特征、断裂相变量及晶体学位向关系进行了深入研究.研究结果表明,ZrO2层状陶瓷由于界面压应力的作用,抑制了烧结过程中晶粒的生长速度及冷却后四方相向单斜相的转变,提高了可相变四方相的含量,提高了断裂相变量,改善了材料的力学性能,但却没有改变四方相和单斜相之间的晶体学位向关系,在层状ZrO2陶瓷中,(100)m//(010)t的晶体学位向关系仍然存在.
参考文献
| [1] | Hansen J J, Cutler R A, Shetty D K. Indentation fracture response and damage resistance of Al2O3-ZrO2 compositesstrengthened by transformation-induced residual stresses[J].Journal of the American Ceramic Society, 1988, 171 (12) :C501 -C505. |
| [2] | Ramachandran N, Chao L Y, Shetty D K. R-curve behavior and flaw insensitivity of Ce-TZP/Al2O3 composite[J]. Journal of the American Ceramic Society, 176(4): 961-969. |
| [3] | Tandon R, Green D J. Crack stability and R-curves due to macroscopic residual compressive stress profiles[J]. J Am Ceram Soc, 1991, 174(8) : 1981- 1986. |
| [4] | Cleeg W J. Fabrication and failure of laminar ceramic composites[J]. Acta Metall Mater, 1992, 140(11): 3085-3093. |
| [5] | Marshall D B, Ratto J J, Lange F F. Enhanced fracture toughness in layered microcomposites of Ce-ZrO2 and Al2O3[J]. JAm CermaSoc, 1999, 74(12): 2975-2979. |
| [6] | Pateras S K, Howard S J, Clyne T W. Contribution of bridging ligament rupture to energy absorption during fracture of metal ceramic laminates[J]. Key Engineering Materials, 1997, 127-131: 35-40. |
| [7] | 陈蓓,丁培道,周泽华.Al2O3/ZrO2层状复合陶瓷的结构设计与性能[J]硅酸盐学报,2001,129(4):386-388. |
| [8] | Wang Hui, Hu Xiaozhi. Surface properties of ceramic laminates fabricated by die pressing[J]. J Am Ceram Soc,1996, 179(2): 553-555. |
| [9] | Liang K M. Transformation driving force for indentation cracking in ZrO2 ceramics [J]. J Am Cerma Soc, 1993, 76(12): 3144. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%