采用有限元数值模拟方法,研究了蒙皮内含分层损伤复合材料格栅加筋板结构(AGS)的稳定性问题.对蒙皮和肋骨分别采用基于Mindlin一阶剪切理论的复合材料层合板单元和层合梁单元来模拟,推导了相应的有限元列式,并通过坐标变换,利用蒙皮与肋骨的几何连续条件,形成了AGS的单元刚度阵和几何刚度阵,建立了含损伤AGS稳定性分析的有限元控制方程.通过典型算例,研究了压缩载荷作用下,分层形状、分层大小、分层深度、肋骨的高度和宽度、布置方式等因素对AGS的稳定性特征的影响.数值结果表明,含分层损伤的AGS具有十分复杂的屈曲性态.屈曲临界力和屈曲模式与分层面积、分层形状、分层深度、肋骨的高度和宽度、布置方式和位置均密切相关.
参考文献
| [1] | Huybrechts S, Meink T E, Wegner P M, etal. Manufacturing theory for advanced grid stiffened structures [J]. Composites Part A: Applied Science and Manufacturing, 2001,33(2): 155-161. |
| [2] | Meink T E, Gregoreck G. Composite grid vs composite sandwich: A comparison based on payload shroud requirements [A]. In: IEEE Aerospace Conference Proceedings [C].Manhattan Beach: IEEE Aerospace and Electronics Systems Society, 1998. |
| [3] | Meink T E, Huybrechts S, Ganley J, et al. Effect of varying thickness on the buckling of orthotropic plates [J]. Journal of Composite Materials, 1999, 33(11): 1048-1061. |
| [4] | Huybrechts S, Hahn E, Meink T E. Grid stiffened structures: A survey of fabrication, analysis and design method [A]. In: International Conference on Composite Materials (ICCM) Proceedings [C]. Paris: The Composites Manufacturing Association (CMA/SME), 1999. |
| [5] | Jaunky N, Knight N F, Ambur D R. Optimal design of grid stiffened composite panels using global and local buckling analysis [J]. J Aircraft, 1998, 35(3): 478-486. |
| [6] | Wodesenbet E, Kidane S, Pang S S. Optimization for buckling loads of grid stiffened composite panels [J]. Composite Structures, 2003, 60(2): 159-169. |
| [7] | Kidanea S, Lia G, Helmsa J, et al. Buckling load analysis of grid stiffened composite cylinders [J]. Composites Part B,2003, 34(1): 1-9. |
| [8] | 白瑞祥,陈浩然.含界面脱粘及表板基体开裂损伤的复合材料夹层板非线性稳定性的研究[J].复合材料学报,2002,19(2):80-84.Bai R X, Chen H R. Investigation of nonlinear buckling behavior of composite sandwich plates with interfacial delamination and matrix micro-cracks [J]. Acta Materiae Compositae Sinica, 2002, 19(2): 80-84. |
| [9] | 白瑞祥,陈浩然,刘远东.含分层损伤复合材料加筋层合板屈曲和后屈曲性态研究[J].大连理工大学学报,2003,43(3):274-280.Bai R X, Chen H R, Liu Y D. Study of buckling and postbuckling behavior of stiffened laminated plates with a delamination damage [J]. Journal of Dalian University of Technology, 2003, 43(3): 274-280. |
| [10] | 李庆华,张剑,孙国钧.含分层损伤大层数复合材料层合板层间热效应分析[J].复合材料学报,2003,20(1):121-124.Li Q H, Zhang J, Sun G J. Analysis of interlaminal thermal effect of composite laminates with a large number of layers [J]. Acta Materiae Compositae Sinica , 2003, 20(1): 121-124. |
| [11] | 王勖成,邵敏.有限元法基本原理和数值方法[M].北京:清华大学出版社,1997.130-138.Wang X C, Shao M. The Theory of the Finite Element Method and the Numerical Methods [M]. Beijing: Tsinghua University Press, 1997. 130-138. |
| [12] | Rizzo A R. FEA gap elements choosing the right stiffness [J]. Mechanical Engineering, 1991, 113(6): 57-59. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%