欢迎登录材料期刊网

材料期刊网

高级检索

采用"等效介质模型",分析了复合材料夹层蜂窝平板的整体换热系数.在此基础上,针对轻质蜂窝(相对密度小于0.3),选取蜂窝面内等效剪切刚度表征夹层结构的承载能力,综合考虑散热能力和结构承载能力,比较了Kagome蜂窝与传统的正三角形、正方形和正六边形蜂窝的性能.结果显示Kagome蜂窝不但散热性能很好,而且通过对蜂窝相对密度和尺寸的优化,在结构质量相同的情况下,Kagome蜂窝的综合性能比传统蜂窝具有明显优势.

参考文献

[1] Evans A G,Hutchinson J W,Fleck N A,Ashby M F,Wadley H N G.The topological design of multifunctional cellular metals[J].Prog Mater Sci,2001,46:309-327.
[2] Wei Z,Zok F W,Evans A G.Design of sandwich panels with prismatic cores[J].Journal of Engineering Materials and Technology,2006,128(2):186-192.
[3] 沈伋,李为吉.蜂窝夹芯结构的电磁、重量多目标优化设计[J].西北工业大学学报,1999,17:665-670.Shen Ji,Li Weiji.Multiobjective optimum design of honeycomb sandwich composite structure with electromagnetism and weight requirements[J].Journal of Northwestern Polytechnical University,1999,17:665-670.
[4] Gu S,Lu T J,Evans A G.On the design of two-dimensional cellular metals for combined heat dissipation and structural load capacity[J].Inter J Heat and Mass Transfer,2001,44:2163-2175.
[5] Groppi G,Tronconi E.Design of novel monolith catalyst supports for gas/solid reactions with heat exchange[J].Chemical Engineering Science,2000,55:2161-2171.
[6] Seepersad C C,Dempsey B M,Allen J K,Mistree F,McDowell D L.Design of multifunctional honeycomb materials[J].AIAA J,2004,42(5):1025-1033.
[7] Wang Bo,Cheng Gengdong.Design of cellular structures for optimum efficiency of heat dissipation[J].Structural and Multidisciplinary Optimization,2005,30:447-458.
[8] Wang Bo,Cheng Gengdong.Design of cellular structures for optimum efficiency of heat dissipation:A three dimensional formulation[C]∥ Bendse M P,Olhoff N,Sigmund O,ed.IUTAM Symposium on Topological Design Optimization of Structures,Machines and Materials:Status and Perspectives.Netherlands:Springer,2006:107-116.
[9] Groppi G,Tronconi E.Continuous vs discrete models of nonadiabatic monolith catalysts[J].AIChE Journal,1996,42(8):2382-2387.
[10] Tian J,Kim T,Lu T J,Hodson H P,Queheillalt D T,Wadley H N G.The effects of topology upon fluid flow and heat-transfer within cellular copper structures[J].Int J Heat and Mass Transfer,2004,47:3171-3186.
[11] Wang A J,McDowell D L.In-plane stiffness and yield strength of periodic metal honeycombs[J].Journal of Engineering Materials and Technology,2004,126:137-156.
[12] 刘书田,郑新广,程耿东.特定弹性性能材料的细观结构设计优化[J].复合材料学报,2001,18(2):124-127.Liu Shutian,Zheng Xinguang,Cheng Gengdong.Microstructure design optimization of materials with specific elastic properties[J].Acta Materiae Compositae Sinica,2001,18(2):124 -127.
[13] Sigmund O,Torquato S.Design of materials with extreme thermal expansion using a three-phase topology optimization method[J].Journal of Mechanical Physics of Solids,1997,45:1037-1067.
[14] 刘书田,曹先凡.零膨胀材料设计与模拟验证[J].复合材料学报,2005,22(1):126-132.Liu Shutian,Cao Xianfan.Design optimization of material with zero thermal expansion coefficients and design verification with numerically simulated experiments[J].Acta Materiae Compositae Sinica,2005,22(1):126-132.
[15] Christensen R M.Mechanics of cellular and other low-density materials[J].Int J Solids and Structures,2000,37:93-104.
[16] Hyun S,Torquato S.Optimal and manufacturable two-dimensional,Kagome-like cellular solids[J].J Mater Res,2002,17:137-144.
[17] Shah R K,London A L.Laminar flow forced convection in ducts,supplement 1 to advances in heat transfer[M].New York:Academic Press,1978:405-410.
[18] Shah R K,London A L.Effects of nonuniform passages on compact heat exchanger performance[J].ASME,Journal of Engineering for Power,1980,102:653-659.
[19] Budiansky B.On the minimum weights of compression structures[J].Int J Solids and Structures,1999,36:3677-3708.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%