欢迎登录材料期刊网

材料期刊网

高级检索

采用酚醛树脂作为炭纤维表面处理剂,可以显著提高多种炭纤维和环氧树脂界面强度.通过XPS、AFM、SEM和层间剪切强度等方法,研究了不同浓度的酚醛树脂表面处理剂对炭纤维增强环氧树脂复合材料层间剪切强度、炭纤维表面元素和化学键组成的影响,以及炭纤维增强环氧树脂复合材料断面微观形貌的变化.XPS和AFM分析结果表明酚醛树脂和炭纤维表面发生了化学反应,而且酚醛树脂处理剂浓度越高,和炭纤维表面发生反应的基团也越多,表面越光滑平整,SEM和层间剪切强度研究表明酚醛树脂处理后的复合材料界面粘结性能得到很大的改善,而且界面粘结性能强烈依靠处理剂浓度.

参考文献

[1] 杨永岗,贺福,王茂章,等.炭纤维表面处理及其评价[J].材料研究学报,1996,10(5):460-466.Yang Yonggang,He Fu,Wang Maozhang,et al.Surface treatment of carbon fiber and its evaluation[J].Chinese Jour-nal of Material Research,1996,10(5):460-466.
[2] Tang L,Kardos J L.A review of methods for improving the interracial adhesion between carbon fiber and polymer matrix[J].Polymer Composites,1997,18(1):100-112.
[3] 贺福,杨永岗.炭纤维的表面处理和复合材料的层间剪切强度[J].航空材料学报,1994,14(4):55-61.He Fu,Yang Yonggang.Surface treatment of carbon fibers and interlaminar shear strength of composites[J].Journal of Aeronautical Materials,1994,14(4):55-61.
[4] Rhee H W.Effect of reactive and non-reactive fiber coatings upon performance of graphite/epoxy composites[J].Polymer Composites,1991,11(12):213-225.
[5] 李笃信,贾德民.聚合物的表面接枝改性技术进展[J].中国塑料,1998,12(2):20-25.Li Duxin,Jia Detain.The development of surface grafting modifi-cation of polymers[J].China Plastics,1998,12(2):20-25.
[6] Broughton W R,Kumosa M,Hull D.Analysis of the iosipes-cu shear test as applied to unidirectional carbon-fibre rein-forced composites[J].Composites Science and Technology,1990,38(4):299-326.
[7] 贺福,杨永岗.提高炭纤维强度的理论基础及其技术途径[J].高科技纤维与应用,2001,26(2):7-10.He Fu,Yang Yonggang.Theoretical basis and technical path of increasing strength of carbon fiber[J].Hi-tech Fiber & Application,2001,26(2):7-10.
[8] Varna J,Joffe R,Berglund L A.Interfacial toughness evalua-tion from the single-fiber fragmentation test[J].Composites Science and Technology,1996,56(9):1106-1109.
[9] Shioya M,Takaku A.Estimation of fibre and interracial shear strength by using a single-fibre composite[J].Composites Science and Technology,1995,56(1):33-39.
[10] 张宏军,周晓东,戴干策,等.嵌段共聚偶联剂的合成及其对玻纤环氧复合材料性能的影响[J].玻璃钢/复合材料,2005(3):30-33.Zhang Hongjun,Zhou Xiaodong,Dai Gance,et al..Synthesis of a block copolymer coupling and its effects on properties of glassfiber/epoxy composites[J].Fiber Reinforced Plastics/Composite,2005(3):30-33.
[11] 龙军,张志谦,魏月贞,等.接枝改性对F-12纤维及其环氧复合材料力学性能影响的研究[J].材料科学与工艺,1999,7(3):46-49.Long Jun,Zhang Zhiqian,Wei Yuezhen,et al.Effect of graf-ting modification on mechanical properties of F-12 fiber and its epoxy composites[J].Material Science and Technology,1999,7(3):46-49
[12] 秦伟,张志谦,黄玉东,等.超声处理对RTM成型复合材料界面性能的影响[J].复合材料学报,2003,20(3):31-34.Qin Wei,Zhang Zhiqian,Huang Yudong,et al.Effect of ul-trasonic treatment on the interfacial performances of RTM composites[J].Acta Materiae Compositae Sinica,2003,20(3):31-34.
[13] 曹琳,黄玉东,张志谦,等.磷酸盐溶液中碳纤维表面电化学改性[J].复合材料学报,2004,21(3):28-32.Cao Hailin,Huangyudong,Zhang Zhiqian,et al.Electro-chemical treatment of carbon fibers in aqueous phosphate[J].Acta Materiae Compositae Sinica,2004,21(3):28-32.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%