在对氮化硅粉料进行助烧剂包覆和凝胶注模成型的基础上,研究了冷等静压凝胶注模成型氮化硅坯体、氧化氮化硅包覆料和气压烧结制度对凝胶注模成型氮化硅陶瓷的抗弯强度和韦泊尔模数的影响冷等静压有利于提高凝胶注模成型氮化硅陶瓷的力学性能.合适的粉料氧化制度和烧结制度都能提高材料的抗弯强度和韦泊尔模数.实验采用优化的工艺,制备出的氮化硅陶瓷的三点弯曲强度和两参数韦泊尔模数(20个试样)分别高达944.7±29.5MPa和33.9.
参考文献
| [1] | C.Olagnon, D.McGarry, E.Nagy, The effect of slip casting parameters on the sintering and final properties of Si3N4. British Ceramic Transactions and Journal, 88(3), 75(1989) |
| [2] | Nishioka Takao, Matsunuma Kenji, Yamamoto Takehisa, Yamakawa Akira, Miyake Masaya, Development of high strength Si3N4 sintered body for the valve systems of automotive engines. SAE Technical Paper Series International Congress and Exposition 1992 (SAE Warrendale PA USA, 1992) p.1～9 |
| [3] | C.Young Albert, O.Omatete Ogbemi, A.Janney Mark, A.Menchhofer Paul, Gelcasting of alumina. Journal of the American Ceramic Society, 74(3), 612(1991) |
| [4] | O.Omatete Ogbemi, A.Janney Mark, A.Strehlow Richard, Gelcasting a new ceramic forming process. Ceramic bulletin, 70(10), 1641(1991) |
| [5] | Kleebe, Hans-Joachim; Pezzotti, Giuseppe; Ziegler, Guenter, Microstructure and fracture toughness of Si3N4 ceramics: combined roles of grain morphology and secondary phase chemistry, Journal of the American Ceramic Society, 82(7), 1857(1999) |
| [6] | Yang Jian-Feng, Ohj Tatsuki, Niihara Koichi, Influence of Yttria-Alumina Content on Sintering Behavior and Microstructure of Silicon Nitride Ceramics, Journal of the American Ceramic Society, 83(8), 2094(2000) |
| [7] | J.Tseng Wenjea, Kita Hideki, Aa-Fired Strength of Sintered Silicon Nitride Ceramics, Ceramics International, 26(2), 197(2000) |
| [8] | Zhou, Longjie; Huang, Yong; Xie, Zhipeng; Cheng, Yi-Bing Gas-discharging reactions and their effect on the microstructures of green bodies in gelca sting of non-oxide materials, Materials Letters, 45(1), 51(2000) |
| [9] | Huang Yong, Ma Liguo, Tang Qiang, Yang Jinlong, Xie Zhipeng, Xu Xingli, Surface Oxidation to Improve Water-Based Gelcasting of Silicon Nitride, Journal of Materials Science, 35(14), 3519(2000) |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%