研究了添加少量富铈混合稀土的AM60B+xRE及AZ91D+xRE合金(x=0.4、0.8、1.2、1.6和2.0%,质量分数)固溶处理后的显微组织与机械性能.结果表明,添加混合稀土能显著提高合金的抗拉强度σb和屈服强度σ0.2,固溶处理明显提高AZ91D+xRE合金的强度;AM60B+xRE及AZ91D+xRE合金的铸态组织由α(Mg)固溶体、杆状Al11RE3相、颗粒状Al10Ce2Mn7相以及网状Mg17Al12相组成,经过固溶处理后,网状Mg17Al12相完全溶解,只剩下热稳定性较高的Al11RE3相和Al10Ce2Mn7相,随固溶时间的延长,其形态略有改变.AM60B+xRE合金拉伸试样断口呈带局部韧窝的准解理断裂形式,而AZ91D+xRE合金则呈现沿晶断裂+解理断裂的混合断口形态.
参考文献
| [1] | Luo A, Renaud J, and Nakatsugawa I, Magnesium castings for automotive applications, JOM, 47(7), 28-31(1995) |
| [2] | LIU Zheng(刘正),WANG Yue(王越),Friendrich Klein.APPlication and Developing Tendency of Magnesium Die-casting Alloys in Automobile Industry(压铸镁合金在汽车工业中的应用和发展趋势).Special Casting and Nonferrous Alloys(特种铸造及有色合金),20(5),55(1999) |
| [3] | LIU Zheng(刘正),WANG Yue(王越),Development Trends of Research and APPlication of Magnesium Alloys(镁基轻质材料的研究与应用),Chinese Journal of Materials Research(材料研究学报),14(1),449(2000) |
| [4] | WU Bingyao(吴炳尧).Reviews of the Die-casting Technology for Magnesium alloys(镁合金压铸技术分析).Foundry(铸造),49(8),443(2000) |
| [5] | A.A.Nayed-Hashemi,J.B.Clark,The Ce-Mg(Cerium-Magnesium)System.Bulletin of Alloy Phase Diagrams,9(2),162(1988) |
| [6] | LuYizhen(吕宜振).Study ofthe Effects of RE,Si,and Be onthe Properties of Mg-Al Alloy(RE,Si,Be对Mg-Al合金性能影响的研究),Dissertation for Master's Degree[硕士学位论文],Shanghai Jiaotong University(上海交通大学),1999 |
| [7] | L.Y.Wei, G.L.Dunlop, H.Westengen, Development of microstructure in cast Mg-Al-Rare earth alloys, Materials Science and Technology, 12(9), 741(1996) |
| [8] | G Pettersen, H Wsetengen, R H?ier, and O. Lohne, Microstructure of Pressure Die Cast Magnesium4Wt% Aluminum Alloy Modified with Rare Earth Additions. Materials Science and Engineering A, 207(1),115(1996) |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%