用新型旋转扭矩探测仪对铝合金熔体增粘过程中的粘度进行了实时检测和控制,研究了熔体粘度的变化规律以及粘度对孔结构的影响规律.结果表明,在铝合金的增粘过程中粘度的变化与生长曲线类似;熔体的粘度过高使胞孔小、数量多;而粘度过低则相反.铝合金熔体泡沫化过程的最佳粘度值为27~28 mN·m,可以获得孔结构高度均匀、高比强的泡沫铝合金.
参考文献
[1] | J.Banhart, Norman A.Fleck, Andreas Mortensen, Cellular Metals and Metal Foaming Technology, 1st Edition, (Berlin, Germany, Verlag Metall Innovation Technologie MIT, June 2003), 23 |
[2] | M.F.Ashby, T.J.Lu, Science in China(B), MIT, Vol.46, No.6, 521-532(2003) |
[3] | M.F.Ashby, A.G.Evans, Metal Foams: A Design Guide, 1st Edition (Boston, B-H Press), 23(2000) |
[4] | Wu Zhaojin, He Deping, Chinese Science Bulletin, 45(18), 1667(2000)(吴照金,何德坪,科学通报,45(18),1667(2000)) |
[5] | Zheng Mingjun, He Deping, Dai Ge, Science in China (B), 45(6), 598(2002)(郑明军,何德坪,戴戈,中国科学,45(6),598(2002)) |
[6] | Zou Yi, He Deping, Jiang Jiaqiao, Science in China (B), 47(5), 407(2004)(邹毅,何德坪,蒋家桥,中国科学(B),47(5),407(2004)) |
[7] | J.C.Elliot, US patent 2751289, 1956 |
[8] | Wu Keng, Qian Wei, The Chinese Journal of Nonferrous Metals, 8(1), 80(1998)(吴铿,潜伟,中国有色金属学报,8(1),80(1998)) |
[9] | He Deping, Yang Donghui, Yang Shangrun, 200410044216.X, 2004(何德坪,杨东辉,杨上闰,200410044216.X,2004) |
[10] | Song Zhenlun, He Deping, Journal of Material Research, 11(3), 273(1997)(宋振伦,何德坪,材料研究学报,11(3),273(1997)) |
[11] | H.Ueno, S.Akiyama, Light Metals, 37(1), 42(1987)(上野英俊,秋山茂,轻金属,37(1),42(1987)) |
[12] | M.Itoh,(日)日本金属学会会报,(4),311(1987)(伊藤雅夫, Journal of Japanese Metal Association, (4), 311(1987)) |
[13] | He Deping, Shang Jintang, Zou Yi, 200310106495.8, 2003(何德坪,尚金堂,邹毅,200310106495.8,2003) |
[14] | He Deping, Dai Ge, Shang Jintang, 200410041668.7, 2004(何德坪,戴戈,尚金堂,200410041668.7,2004) |
[15] | Su Erhuang, Calculation and Measurement of the Liquid Viscosity (Beijing, National Defence Industry Publishing Company, 1986) p.69(苏尔皇,液体的粘度计算和测量(北京,国防工业出版社,1986)p.69) |
[16] | Wu Qiang, The rheology performance, microscopic structure, and mechanical properties of partially solidified Al-Cu alloy, (1990)(吴锵,部分凝固铝铜合金的流变学行为,铸锭显微组织及力学性能特点,博士学位论文,东南大学(1990) |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%