用裂纹与位错的相互作用模拟了刃型位错从Ⅰ型裂纹尖端沿多个滑移面的发射,得到了裂纹尖端周围塑性区和无位错区的形状和大小.结果表明,与宏观断裂力学算出的塑性区形状相比,本文给出的塑性区向裂纹前方倾斜;无位错区的形状与塑性区的相似.以应变能密度因子理论为判据,当存在明显的无位错区时,塑性区使裂纹扩展的潜力下降,但扩展方向不变;而当塑性区充分发展、无位错区的作用减小或消失后,裂纹扩展的方向可能发生变化.
参考文献
| [1] | S.M.Ohr,An electron microscope study of crack tip deformation and its impact on the dislocation theory of fracture,Mater.Sci.Eng.,72,1(1985) |
| [2] | Y.H.Chiao,D.R.Clarke,Direct observation of dislocation emission from crack tips in silicon at high temperature,Acta Metal.,37,203(1989) |
| [3] | W.Zielinski,M.J.Lii,W.W.Gerberich,Crack tip dislocation emission arrangements for equilibrium-Ⅰ.In situ TEM observations of Fe-2wt%Si,Acta Metall.Mater.,40,2861(1992) |
| [4] | R.Fu,Q.Y.Long,T.Y.Zhang,C.W.Lung,Cleavage cracktip deformation in single-crystal zinc,J.Phys.D,22,991(1989) |
| [5] | T.Foeke,W.W.Gerberich,Birefringence observations of dislocation emission at crack tips in NaCl single crystals,Scr.Metall.Mater.,24,553(1990) |
| [6] | B.A.Bilby,A.H.Cottrell,K.H.Swinden,The spread of plastic yield from a notch,Proc.R.Soc.London,272,304(1963) |
| [7] | S.J.Chang,S.M.Ohr,Dislocation-free zone model of fracture,J.Appl.Phys.,52,7174(1981) |
| [8] | S.H.Dai,J.C.M.Li,Dislocation-free zone at the crack tip,Scr.Metall.,16,183(1982) |
| [9] | B.S.Majumdar,S.J.Burns,A Griffith crack shielded by a dislocation pile-up,Int.J.Fract.,21,229(1983) |
| [10] | R.H.Zhao,S.H.Dai,J.C.M.Li,Dynamic emission of dislocations from a crack tip-a computer simulation,Int.J.Fract.,29,3(1985) |
| [11] | C.F.Qian,J.C.M.Li,Edge dislocation emitted along multiple inclined slip planes from a mode Ⅰ crack.Ⅱ.Simultaneous emission,Mechanics of Materials,24,11 (1996) |
| [12] | C.F.Qian,J.C.M.Li,The multifarious plastic zones in front of a crack,Scripta Materialia,39,509(1998) |
| [13] | HE qingzhi,LI Zhengneng,Engineering Fracture Mechanics (Beijing,The Press of Tsinghua University,1993) p.53.(何庆芝,郦正能,工程断裂力学(北京,北京航天航空大学出版社,1993)p.53) |
| [14] | Qian Caifu,Jiang Zhongjun,Chen Ping,Duan Chenhong,Cui Wenyong,Micro-simulation of crack tip plastic zone and dislocation-free zone,40,159(2004).(钱才富,姜忠军,陈平,段成红,崔文勇,裂纹尖端塑性区和无位错区的微观模拟,金属学报,40,159(2004)) |
| [15] | Q.Z.Chen,W.Y.Chu,C.M.Hsiao,In situ TEM observation of nucleation and bluntness of nanocracks in thin crystals of 310 stainless steel,Acta Metall.Mater.,43,4371(1995) |
| [16] | Q.Z.Chen,K.W.Gao,Y.Zhang,W.Y.Chu,Nucleation,blunting or propagation of a nanocrack in dislocation-free zone of thin crystals,Fatigue Fract.Mater.Struct.,21,981(1998) |
| [17] | L.J.Qiao,X.Mao,Q.Z.Chen,Nanometer-scale crack initiation and propagation behavior of Fe3Al-based intermetallic alloy,Metall.Mater.Trans.A,26,1461(1995) |
| [18] | Y.Zhang,Y.B.Wang,W.Y.Chu,The in-situ TEM observation of microcrack nucleation in titanium aluminide,Scr.Metal.Mater.,30,541(1994) |
| [19] | T.Zhu,W.Yang,T.Gao,Quasi-cleavage processes driven by dislocation pileups,Acta Mater.,44,3049(1996) |
| [20] | C.F.Qian,L.J.Qiao,W.Y.Chu,Stress distribution and effective stress intensity factor of a blunt crack after dislocation emission,Science in China (Series E),43,421(2000) |
| [21] | V.Lakshmanan,J.C.M.Li,Edge dislocations emitted along inclined planes from a mode I crack,Mater.Sci.Eng.A,104,95(1988) |
| [22] | Ha Kuanfu,Basis of Fracture Physics (Beijing,The Press of Science,2000) p.150(哈宽富,断裂物理基础(北京,科学出版社,2000)p.150) |
| [23] | G.C.Sih,Some basic problems in fracture mechanics and new concepts,Engineering Fracture Mechanics,5,365(1973) |
| [24] | G.C.Sih,Strain-energy-density factor applied to mixed mode crack problems,International Journal of Fracture,10,305(1974) |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%