通过三因素三水平正交设计方法研究了两阶段退火热处理制度的三个温度阶段对TC18钛合金性能、组织的影响,定量分析了合金热处理温度变化对总体性能的影响,结果表明,在本文试验条件下可通过提高中温温度、降低低温温度来提高合金的强度,降低高温温度、提高低温温度可改善合金的塑性,通过降低高温温度或中温温度可提高合金的冲击韧性,显微组织分析表明,TC18钛合金的强度主要受未转变β组织及在其上产生的次生αs相的总的含量、次生αs相的含量、形状的控制;合金的塑性受初生αp相形状及次生αs相的数量、形状控制;合金的冲击韧性受初生αp相的含量及形状控制.
参考文献
[1] | S.L.Nyakana,J.C.Fanning,R.R.Boyer,Quick reference guide for βtitanium alloys in the 00s,Journal of Materials Engineering and Performance,14(6),799(2005) |
[2] | ZHU Feng,JI Bo,ZHU Yifan,Effect ofheat treatment on the microstructure and properties of TCl8 titanium alloys,Rare Metal Materials and Engineering,34(Suppl.3),314(2005) (朱峰,计波,朱益藩,热处理工艺对TC18钛合金组织及性能影响,稀有金属材料科学与工程,34(Suppl.3),314(2005)) |
[3] | CAO Chunxiao,Application of titanium alloy on large transporter,Rare Metals Letters,25(1),17(2006) (曹春晓,钛合金在大型运输机上的应用,稀有金属快报,25(1),17(2006)) |
[4] | SHENG Xianfeng,DING Zhiwen,ZHU Yifan,The effects of deformation and heat treatment on the microstructure and properties of Ti-5A1-5Mo-5V-1Cr-lFe titanium alloys,Acta Metallurgica Sinica,35(Suppl.1),465(1999) (盛险峰,丁志文,朱益藩,热变形量和热处理工艺对Ti-5A1-5Mo-5V-1Cr-1Fe钛合金组织和性能的影响,金属学报,35(Suppl.1),465(1999)) |
[5] | I.S.Polkin,V.L.Rodionov,A.N.Stroshkov,T.V.Ishunkov,V.G.Kudryashov,O.S.Korobov,Structure and mechanical properties of VT22(α+β)high strength titanium alloy semiproducts.in:Titanium'92 Science and Technology,edited by F.H.Froes and I.Caplan(The Minerals,Metals & Materials Society,1993)p.1569 |
[6] | N.V.Moiseev,E.I.Razuvaev,Formation of recrystallized structure in deformed semiproducts from titanium alloys of transition class obtained by isothermal die forming,Metal Science and Heat Treatment,44(7-8),309(2002) |
[7] | A.A.Popov,A.G.Illarionov,A.V.Korelin,Formation of structure and properties in titanium alloys of a transition class after warm rolling,Metal Science and Heat Treatment,42(9-10),348(2000) |
[8] | I.V.Levin,L.A.Smolyakova,G.A.Salishchev,Influence of hot deformation and heat treatment regimes on structure and mechanical properties of titanium alloy VT22,in:Titanium,99 Science and Technology,edited bv I.V.Gorynin,S.S.Ushkov(Saint-Petersburg,CRISM "Prometey",2000)p.383 |
[9] | N.I.Moder,G.V.Savvatyeyeva,G.A.Bondaruk,Assessment of the influence of stresses on the course of the phase transformation process in VT22 alloy,in:Titanium'99 Science and Technology,edited by I.V.Gorynin,S.S.Ushkov(Saint-Petersburg,CRISM "Prometey",2000)p.753-759 |
[10] | MENG Xiaoying,PANG Kechang,YIN Junlin,Effect of heat treatment process on structure and property of TC18 titanium alloy,Heat Treatment,21(1),36(2006)(孟笑影,庞克昌,殷俊林.热处理工艺对TC18钛合金组织和性能的影响,热处理,21(1),36(2006)) |
[11] | MAO Xiaonan,ZHANG Pengsheng,YU Lanlan,ZHAO Yongqing,YUAN Shaochong,The microstructure sensitivity for BT22 titanium alloy,Rare Metal Materials and Engineering,34(Suppl.3),257(2005) (毛小南,张鹏省,于兰兰,赵永庆,袁少冲,BT22钛合金的组织敏感性,稀有金属材料科学与工程,34(Suppl.3),257(2005)) |
[12] | LI Xingwu.SHA Aixue.Sensitivity of microstructure and mechanical properties of TC18 titanium alloy at aging temperature,Rare Metal Materials and Engineering,34(Suppl.3),417(2005) (李兴无,沙爱学,TC18钛合金显微组织和力学性能的时效温度敏感性研究,稀有金属材料科学与工程,34(Suppl.3),417(2005)) |
[13] | SHENG Zhou,XIE Shiqian,PAN Chengyi,Probability and Statistics,third edition,(Beijing,Higher Education Press,2001) (盛骤,谢式千,潘承毅,概率论与数理统计(第三版),(北京,高等教育出版社,2001)) |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%