欢迎登录材料期刊网

材料期刊网

高级检索

采用高温共聚焦激光显微镜(CSLM)对含Ti复合夹杂物诱导晶内针状铁素体(IAF)进行动态原位观察,并用OM,FE-SEM,EDS和EPMA研究奥氏体晶粒尺寸和冷却速率对含Ti复合夹杂物诱导生成IAF的影响.结果表明,IAF的开始生成温度随奥氏体晶粒尺寸的增加,先升高后降低;生成IAF体积分数随冷却速率的提高显著增加,归功于IAF开始生成温度的提高.贫Mn区的形成是含Ti复合夹杂物(Ti-Mn-O)+ (Si-Al-Mn-O) +MnS诱导生成IAF的主要驱动力.此外,在该实验条件下得出,当奥氏体晶粒尺寸在132-255 μm时,IAF开始生成的温度范围为550-633℃;奥氏体晶粒尺寸为176 μm,冷却速率为5℃/s时,室温组织中IAF体积分数高达90%.

参考文献

[1] Mabuchi H,Uemori R,Fujioka M.ISIJ Int,1996; 36:1406
[2] Koseki T,Thewlis G.Mater Sci Technol,2005; 21:867
[3] Zhang D,Terasaki H,Komizo Y.Acta Mater,2010; 58:1369
[4] Smith Y E,Coldren A P,Crydcrman R L.Toward Improved Ductility and Toughness. Tokyo:Climax Molybdenum Company Ltd.,1972:119
[5] Takamura J C,Mizoguchi S.Proc 6th Int Iron and Steel Congress,Janpan,1990(CD-Rom)
[6] Yamada W,Matsumiya T.Proc 6th Int Iron and Steel Congress,Janpan,1990(CD-Rom)
[7] Kikuchi N,Nabeshima S,Kishimoto Y,Ishiguro Y,Sridhar S.ISIJ Int,2009; 49:1036
[8] Byun J S,Shim J H,Cho Y W,Lee D N.Acta Mater,2003; 51:1593
[9] Yang C W,Jiang M,Hu Z Y,Lu N B,Wang X H.AISTech 2011 Proceedings,USA:The Association for Iron & Steel Technology,2011:661
[10] Yin H B,Shibata H,Emi T,Suzuki M.ISIJ Int,1997; 37:936
[11] Sarma D S,Karasev A V,Jonsson P G.ISIJ Int,2009;49:1063
[12] Shu W,Wang X M,Li S R,He X L.Acta Metall Sin,2010;46:997(舒玮,王学敏,李书瑞,贺信莱.金属学报,2010:46:997)
[13] Yang Z,Wang F,Wang S,Song B.Steel Res Int,2008; 79:390
[14] Ohkita S,Horii Y.ISIJ Int,1995; 35:1170
[15] Ricks R A,Howell P R,Barritte G S.J Mater Sci,1982;17:732
[16] Jin H H,Shim J H,Cho Y W,Lee H C.ISIJ Int,2003;43:1111
[17] Brooksbank D,Andrews K J.Iron Steel Inst,1972; 210:246
[18] Shim J H,Oh Y J,Suh J Y,Cho Y W,Shim J D,Byun J S,Lee D N.Acta Mater,2001; 49:2115
[19] Shim J H,Cho Y W,Chung S H,Shim J D,Lee D N.Acta Mater,1999; 47:2751
[20] Byun J S,Shim J H,Suh J Y,Oh Y J,Cho Y W,Shim J D,Lee D N.Mater Sci Eng,2001; A319 321:326
[21] Ishikawa F,Takahashi T,Ochi T.Metall Mater Trans,1994:A25:929
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%