欢迎登录材料期刊网

材料期刊网

高级检索

介绍了对SrCo0.8Fe0.2O3-δ及SrCo0.8Fe0.1Sn0.1O3-δ两种透氧膜材料相组成、热学性能及氧渗透性能的研究, 发现实验中获得的SrCo0.8Fe0.2O3-δ透氧膜材料具有长期的相组成稳定性; 在它的B位进一步用Sn取代Fe,获得名义组成SrCo0.8Fe0.1Sn0.1O3-δ样品, 具有典型的双相组成特征. 与单相SrCo0.8Fe0.2O3-δ相比, 双相结构SrCo0.8Fe0.1Sn0.1O3-δ样品的热膨胀率降低, 抗热冲击性能增加显著; 同时, 氧渗透性能也有一定程度的提高, 如1.2mm厚的SrCo0.8Fe0.2O3-δ陶瓷膜样品在1000℃具有1.87×10-6mol cm-2 s-1的透氧率(PO2(h)=2.09×104Pa, PO2(l)=1.2×103Pa), 同样条件下的SrCo0.8Fe0.1Sn0.1O3-δ样品透氧率为2.49×10-6 mol cm-2 s-1.

The phase composition, thermal shocking resistance and the separating properties
of both SrCo0.8Fe0.2O3-δ(SCF) and SrCo0.8Fe0.1Sn0.1O3-δ (SSCF) membranes were investigated systematically. It was found the as
prepared SCF had long-term phase stability, and the SSCF had the composite feature with dual phase composition. As compared with the SCF, the SSCF had a more promoted thermal shocking resistance, which related to the decreasing of thermal expansion coefficient of it in comparison with the former. Furthermore, a permeation rate of 1.87×10-6 mol cm-2 s-1 was obtained on the as-prepared SCF membrane at 1000℃ and under oxygen partial pressure gradient of the PO2(h)/PO2(l)=0.209atm /0.012atm,
and at the same measuring condition, the permeability was 2.49×10-6 mol cm-2 s-1 for the as prepared SSCF one.

参考文献

[1] Teraoka Y, Zhang Hua-min, Furukawa S, et al. Chem. Lett.,1985. 1743--1746.
[2] 邵宗平, 熊国兴, 杨惟慎, 等(SHAO Zong-Ping, { et al). 无机材料学报(Journal of Inorganic Materials), 2001, 16 (2):297--304.
[3] Yang Li, Gu Xue-hong, Tan Liang, et al. Ind. Eng. Chem. Res.,2002, 41:4273--4280.
[4] Kruidhof H, Bouwmeester H J M, Doorn R H E, et al. Solid State Ionics,1993, 63-65:816--822.
[5] Qiu L, Lee T H, Liu L-M, et al. Solid State Ionics,1995, 76:321--329.
[6] Kharton V V, Yaremchenko A A, Naumovich E N. J. Solid State Electrochem.,1999, 3:303--319.
[7] 樊传刚, 黄显怀, 檀杰, 等. 功能材料, 2004, 3516 (增刊):2072--2075.
[8] 樊传刚. 博士论文. 合肥: 中国科学技术大学, 2003.
[9] 邓增强. 博士论文. 合肥: 中国科学技术大学, 2002.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%