用甲苯-2,4-二异氰酸酯(TDI)和硬脂酸(SA)复合改性木粉,在双螺杆挤出机中制备了聚丙烯(PP)基的木塑复合材料(wPC),研究了SA/TDI摩尔比对木粉表面性能、复合材料力学性能和加工性能的影响.结果表明,随着SA/TDI摩尔比的增大,改性木粉的表面张力逐渐减小,与PP的界面张力先减小后增大;与未改性的WPC相比,SA/TDI复合改性剂对WPC的拉伸强度、弯曲强度、缺口冲击强度影响不明显,但对无缺口冲击强度提升较大;当SA/TDI摩尔比为1.07时,复合材料的无缺口冲击强度和熔体质量流动速率分别达到9.74 kJ/m2和13.12 g/10 min,分别比未改性WPC提高了77%和22%.
参考文献
[1] | YANG Jun,GAO Lei,JIAO Lei,et al.Interface Behavior of Bio-fiber Filled Polymer Composite[J].Polym Mater Sci Eng,2011,27(9):56-59(in Chinese).杨俊,高磊,焦雷,等.生物质纤维填充聚合物复合材料的界面行为[J].高分子材料科学与工程,2011,27(9):56-59. |
[2] | LIU Ting,LU Shaorong,WANG Yiliang,et al.Structure and Property of SF/PP Wood-plastic Composites Affected by Super-dispersant Containing Flexible Segment[J].Polym Mater Sci Eng,2011,27 (1):84-87 (in Chinese).刘婷,陆绍荣,王一靓,等.含柔性链超分散剂对SF/PP木塑复合材料结构和性能的影响[J].高分子材料科学与工程,2011,27(1):84-87. |
[3] | HAO Zhi.Application of Titanate Coupling Agent on Wood Four/PP Composites[J].J Guizhou Univ (Nat Sci),2012,29(2):111-113,126(in Chinese).郝智.钛酸酯偶联剂在木粉/PP复合材料中的应用[J].贵州大学学报(自然科学版),2012,29(2):111-113,126. |
[4] | GUAN Sujun,WAN Chunfeng,WANG Lina,et al.Mechanical Properties of Basalt Fiber Reinforced Wood-plastic Composites[J].Acta Mater Compos Sin,2011,28 (5):162-166 (in Chinese).关苏军,万春风,汪丽娜,等.玄武岩纤维增强木塑复合材料的力学性能[J].复合材料学报,2011,28(5):162-166. |
[5] | Pritchard G.Two Technologies Merge:Wood Plastic Composites[J].Reinf Plast,2004,48 (6):26-29. |
[6] | Karmarkar A,Chauhan S S,Jayant M.Mechanical Properties of Wood-fiber Reinforced Polypropylene Composites:Effect of a Novel Compatibilizer with Isocyanate Functional Group[J].Compos Part A-Appl S,2007,38(2):227-233. |
[7] | Wang H,Sheng K C,Lan T,et al.Role of Surface Treatment on Water Absorption of Poly (vinyl chloride) Composites Reinforced by Phyclostachys Pubescens Particles[J].Compos Sci Technol,2010,70 (5):847-853. |
[8] | Aurrekoetxea J,Sarrionandia M,Gómez X.Effects of Microstructure on Wear Behaviour of Wood Reinforced Polypropylene Composite[J].Wear,2008,265 (5/6):606-611. |
[9] | Bledzki A K,Mamun A A,Jaszkiewicz A,et al.Polypropylene Composites with Enzyme Modified Abaca Fibre[J].Compos Sci Technol,2010,70 (5):854-860. |
[10] | SHENG Yu,ZHU Deqin,SU Xiaofen,et al.Effects of Different Treatment Agent on the Mechanical Properties of PP/wood Flour Composites[J].Polym Mater Sci Eng,2012,28 (10):51-54 (in Chinese).生瑜,朱德钦,苏晓芬,等.不同改性剂对PP/木粉复合材料性能的影响[J].高分子材料科学与工程,2012,28(10):51-54. |
[11] | Deng R,Chen Y,Chen P,et al.Properties and Biodegradability of Water-Resistant Soy Protein/poly (ε-caporlactone) /Toluene-2,4-diisocyanate Composites[J].Polym Degrad Stab,2006,91(9):2189-2197. |
[12] | Joseph K,Thomast S.Effect of Chemical Treatment on the Tensile Properties of Short Sisal Fibre-Reinforced Polyethylene Composites[J].Polymer,1996,37 (23):5139-5149. |
[13] | ZHU Deqin,SHENG Yu,SU Xiaofen,et al.Effects of TDI on Properties of PP/wood Flour Composites:Effects of Amounts of Modifier TDI and Wood Flour[J].J Fujian Forestry,2011,31 (3):276-280(in Chinese).朱德钦,生瑜,苏晓芬,等.TDI对聚丙烯/木粉复合材料性能的影响:改性剂TDI用量和木粉用量的影响[J].福建林学院学报,2011,31(3):276-280. |
[14] | HONG Xiaoyin,FENG Hanbao.Chemistry of Coating[M].Beijing:Science Press,1997:186-191 (in Chinese).洪啸吟,冯汉保.涂料化学[M].北京:科学出版社,1997:186-191. |
[15] | GB/T 1040-2006.Plastics-Determination of Tensile Properties[S].Beijing:China Standards Press,2006(in Chinese).GB/T 1040-2006.塑料拉伸性能的测定[S].北京:中国标准出版社,2006. |
[16] | GB/T9341-2000.Plastics-Determination of Flexural Properties[S].Beijing:China Standards Press,2000 (in Chinese).GB/T9341-2000.塑料弯曲性能实验方法[S].北京:中国标准出版社,2000. |
[17] | GB/T1043-2008.Plastics-Determination of Charpy Impact Properties[S].Beijing:China Standards Press,2008 (in Chinese).GB/T1043-2008.塑料简支梁冲击性能的测定[S].北京:中国标准出版社,2008. |
[18] | GB/T3682-2000.Determination of the Melt Mass-flow Rate (MFR) and the Melt Volume-flow Rate (MVR) of Thermoplastics[S].Beiiing:China Standards Press, 2000 (in Chinese).GB/T3682-2000.热塑性塑料熔体质量流动速率和熔体体积流动速率的测定[S].北京:中国标准出版社,2000. |
[19] | Van Krevelen D W,Hoftyzer P J.Properties of Polymers,Their Estimation and Correlation with Chemical Structure[M].New York:Elsevier Scientific Pub Co.,1976:121-127. |
[20] | Wu S.Polymer Interface and Adhesion[M].New York:Marcel Dekkar,1982:102-106. |
[21] | Wu W,Xu Z D.Study on the Reinforced and Toughened PP Blends with the Rigid Nano-particles and the Elastic Rubberparticles[J].Acta Polym Sin,2000,28(1):99-104. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%