欢迎登录材料期刊网

材料期刊网

高级检索

为了对液晶滴注工艺和相关不良进行优化改善,本文研究了真空对合之后液晶屏内液晶扩散时间与位移的关系.在牛顿流体假设前提下提出了液晶屏倾斜放置下液晶扩散的模型.数学推导证明,前人研究的平放状态下的方程是倾斜角度为0°时的特殊情况.通过两种状态模型计算数据对比可以得出:位移越大,重力对倾斜状态扩散时间影响越显著,这是在同等扩散位移下两种状态扩散时间的差异所在.面板尺寸大小、形状分布设计等参数会影响液晶扩散的最终形状;液晶盒内间隙、隔垫物会影响液晶扩散速度,间隙越均一,隔垫物密度越小,扩散受到的影响越小.实验研究表明,实测的数据与模型理论计算数据基本相符,基于牛顿流体假设下的模型可以较好地预测液晶的扩散行为.

参考文献

[1] 彭毅雯,徐伟,罗毅,等.TFT-LCD面影像残留改善研究[J].液晶与显示,2012,27(1):66-69.Peng Y W,Xue W,Luo Y,et al.Improvement of TFT-LCD area image sticking[J].Chinese Journal of Liquid Crystals and Displays,2012,27 (1):66-69.(in Chinese)
[2] 万建武.表面张力作用下的平行平板下填充流动模型研究[J],广州大学学报:自然科学版,2010,9(5):11-15.Wang J W.Study of underfill flow model between two parallel plates driven by capillary forces[J].Journal of Guangzhou University:Natural Science Edition,2010,9(5):11-15.(in Chinese)
[3] Wang J.Underfill of flip-chip on organic substrate:viscosity,surface tension and contact angle[J].Microelectronics Reliability,2002,42:293-299.
[4] Washburn E W.The dynamics of capillary flow[J].Physical Review,1921,17(3):273-283.
[5] Gamota D R,Melton C M.Advanced encapsulant materials systems for flip-chip-on-board assemblies.Ⅰ.Encapsulant materials with improved manufacturing properties.Ⅱ.Materials to integrate the reflow and underfilling processes[C].Electronics Manufacturing Technology Symposium,Austin,1996:1-9.
[6] Pascarella N W,Baldin D F.Compression flow modeling of underfill encapsulation for low cost flip-chip assembly[J].I EEE Transactions on Components,Packaging,and Manufacturing Technology,Part C,1998,21 (4):325-335.
[7] Han S,Wang K K.Analysis of the flow of encapsulant during underfill encapsulation of flip-chips[J].IEEE Transactions on Components,Packaging,and Manufacturing Technology,Part B,1997,20 (4):424-433.
[8] Sehwiebert M K,Leong W H.Underfill flow as viscous flow between parallel plates driven by capillary action[J].IEEE Transactions on Components,Packaging,and Manufacturing Technology,Part C,1996,19(2):133-137.
[9] 丁祖荣.流体力学[M].北京:高等教育出版社,2004:16-22.Ding Z R.Hydromechanics[M].Beijing:Higher Education Press,2004:16-22.(in Chinese)
[10] 吴望一.流体力学[M].北京:北京大学出版社,1982:161-170.Wu W Y.Hydromechanics[M].Beijing:Peking University Press,1982:161-170.(in Chinese)
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%