Oncell触摸技术将触摸感应膜层集合于液晶显示面板上,相较于常规的双层技术方案,具有更轻薄化,透过率更高,制程更优的特点.本文将单层多点电容方案、复合盖板、防反射、防指纹涂层、全贴合等新技术用在了 Oncell 上.研究了在车载复杂状况下的使用,可匹配不同的液晶显示驱动技术.经过试验测试,最新开发的 Oncell触控技术,可以支持3点以上触控,支持戴手套操作,通过头部撞击试验,其表面反射率低于3%,线性度为±1.5 mm,最新开发的 Oncell触控技术关键技术问题得到了解决,经过测试,可以满足车载产品苛刻的要求.今后Oncell触摸技术也必将会成为车载触控领域重要的技术方案.
Oncell touch panel technology is a new technology of touch panel which touch sensor is inte-grated on the surface of LCD.Compared with outcell touch panel,oncell touch panel is thinner,lighter and easier to produce.New technology, such as single layer multi-touch capacitor touch panel, PMMA+PC cover,AR,AF film and optical bonding etc.are used in Oncell touch panel.Oncell touch panel can match different LCD driving method.Oncell touch panel can run regularly in rugged environ-ment such as complex electromagnetic environment,strong sunlight,high and low temperature. Finally,the new technology of Oncell touch panel can support up than 3 point touch,glove touch and head impacted test.The surface reflectance is lower than 3%,and linearity is ± 1 .5 mm.The Oncell touch panel solved the key technical problems and can pass the automotive test.Thus Oncell touch technology will be the most important technology of automotive.
参考文献
[1] | 白石;王延峰;黄敏;冷长林;贾勇;金春梅.LCD触控感应技术发展趋势[J].液晶与显示,2010(4):572-575. |
[2] | 陈新;张桂香;肖奇云.电动汽车液晶数字仪表的设计[J].汽车工程,2013(3):272-276. |
[3] | 赵立军;赵桂范.头部受汽车仪表板撞击损伤的模拟[J].农业机械学报,2005(3):22-26. |
[4] | 应根裕;胡文波;邱勇.平板显示技术[M].北京:人民邮电出版社,2003:119-127. |
[5] | 廖燕平;王军;李曙新.薄膜晶体管(TFT)及其在平板显示中的应用[M].北京:电子工业出版社,2008:30-45. |
[6] | 孙杨,张永栋,朱燕林.单层ITO多点电容触摸屏研究[C].2010中国平板显示学术会议论文集,2010:504-507. |
[7] | Benko H.Precise selection techniques for multi-touch screeens[A].,2006:1263-1272. |
[8] | 天马徽电子股份有限公司 .电容式触摸屏[P].CN 202838275U,2012-06-15. |
[9] | Han J Y.Low-cost multi-touch sensing through frustrated total internal reflection[A].,2005:115-118. |
[10] | 戴峻峰.基于NiosⅡ的LCD触摸屏应用设计[J].液晶与显示,2012(05):703-707. |
[11] | 上海天马微电子股份有限公司 .集成触摸屏的液晶显示面板、装置及触摸检测方法[P].CN 101738765A,2008-11-24. |
- 下载量()
- 访问量()
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%