自动光学检测系统采用周期性比较和逻辑运算的方法获取缺陷点的信息。但由于其最小周期比较 Pitch 存在小数，会造成比较对象的非正确选取。利用两点一线原理，可以构建一次线性方程使原来断点模拟成连续的点，达到无论比较距离是会否为整数，都能找到相对应的灰度值的效果。利用此方法可以提高异常点检出的准确度，同时会避免对产品产量、品质及成本的不利影响，具有重要意义。
Method for automatic optical inspection system with periodic comparison and logic operation can obtain defect point information.Because of the existence of minimal cycle comparison of Pitch dec-imal,we cannot get the correct comparison.The use of two points formed one line,we can construct a linear equation to simulate the original breakpoints into continuous points.Just then,whether the comparative distance is an integer,the corresponding effect is found in the gray value.Using this method to improve the accuracy of anomaly check,the adverse effect is avoided on the yield,quality and cost of the product,which has the vital significance.
参考文献
| [1] | 胡亮 .线阵CCD实现钢板表面缺陷在线检测关键技术及其应用研究[D].天津大学,2005. |
| [2] | 蒲亮,叶玉堂,宋昀岑,刘莉,陈东明,潘明.基于优化K-D树的大面积高密度PCB快速AOI[J].仪器仪表学报,2011(04):955-960. |
| [3] | 骆文博,王广志,丁海曙,秦志军,吴剑.基于线阵CCD的高精度位置检测[J].清华大学学报(自然科学版),2002(09):1139-1143. |
| [4] | 张铁轶,余道平,王野,刘超强,张祥.自动光学检测的彩膜分区检查与判定[J].液晶与显示,2014(01):34-39. |
| [5] | 李丙玉,王晓东,李哲.在轨完成 CCD 非均匀性校正的方法[J].液晶与显示,201 1,26(2):255-259. Li B Y,Wang X D,Li Z.Completion of in-orbit CCD non-uniformity correction method[J].Chinese J ournal of Liquid Crystals and Displays,201 1,26(2):255-259.(in Chinese),2011. |
| [6] | 王运,颜昌翔.光谱仪图像的亚像素配准[J].光学精密工程,2012(03):661-667. |
| [7] | 李晶,袁峰,丁振良.基于Rodrigues参数的多线阵CCD外姿态测量系统的姿态解算[J].光学精密工程,2012(04):858-863. |
| [8] | Park T H,Kim H J,Kim N.Path planning of automated optical inspection machines for PCB assembly systems[J]. International J ournal of Control,Automation,and Systems.2006,4(1):96-104,2006. |
| [9] | Agapito L,Hayman E,Reid I.Self-calibration of rotating and zooming cameras[J].International J ournal of Com-puter Vision,2001(45):107-127,2001. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%