随着高铁的普及,列车螺钉松动、车身变形等安全问题渐渐引起了人们的重视,如何检测高铁车身是本文要研究的问题.本文采用激光三角法测量模型,当线结构光扫描高铁车身时,可以根据激光条纹的畸变程度,判断高铁列车是否存在安全隐患,而如何快速、精确地提取激光条纹中心线是首先要解决的问题.在考虑了光源选择、环境噪声、被测物反射等因素的基础上,首先对图像进行预处理,选择中值滤波去除噪声,然后用最大类间方差法将目标区域与背景区域分割；最后,用改进的灰度重心法对目标区域进行中心线提取.本文在 FPGA 上实现了对分辨率为1024 pixel ×200 pixel图像的处理,实验结果表明,提取光带中心线用时不超过0．97 ms,能够满足高铁检测系统对光带中心线提取实时性和准确性的要求.
With the popularization of high-speed rail,the screw loosening,body deformation and other safety issues gradually attract people′s attention,and how to check the rail body is the research field. Using laser 3-dimension measurement model,when the line structure light scans high-speed rail body,it can estimate whether high-speed rail safety hazards exist according to the degree of distortion of the laser stripe.How to quickly and accurately extract the center line of the laser stripe has become the primary problem.Based on the consideration of the factors,such as the selection of the light source,the environmental noise,and the reflection of the measured object,first,we use median filter to remove the noise as pre process,and then target area and background are segmented by OTSU;fi-nally,we use improved gray barycenter method to extract the center line of target area.In this paper the image is 1 024 pixel × 200 pixel in FPGA,the experience shows that extraction time of center line is less than 0.97 ms.The algorithm can satisfy the requirements of high-speed rail detection system for light centerline extraction of real-time as well as high precision.
参考文献
| [1] | 许宁 .线结构光光条图像处理方法研究[D].哈尔滨工程大学,2007. |
| [2] | 吕乃光;孙鹏;娄小平;韩建栋.结构光三维视觉测量关键技术的研究[J].北京信息科技大学学报（自然科学版）,2010(1):1-5. |
| [3] | 贾琦 .基于三角测量法的激光位移传感器的研究[D].长春理工大学,2014. |
| [4] | 李莹莹;张志毅;袁林.线结构光光条中心提取综述[J].激光与光电子学进展,2013(10):9-18. |
| [5] | 郭奎;熊显名.复杂背景下蓝色线结构光中心提取方法[J].计算机系统应用,2014(6):111-117. |
| [6] | 张瑞瑛;周萍;冯煦;李松;舒强.大视场下线结构光光条中心的快速提取[J].应用光学,2010(3):432-436. |
| [7] | 李丹;耿楠;亢娟娜.复杂背景下光条中心提取算法研究[J].计算机应用与软件,2013(3):271-273,314. |
| [8] | 蔡怀宇;冯召东;黄战华.基于主成分分析的结构光条纹中心提取方法[J].中国激光,2015(3):270-275. |
| [9] | 郭玲;朱茂之.结构光条纹中心线的鲁棒提取[J].光电技术应用,2014(4):30-33,75. |
| [10] | 江亲瑜;李平;孙兰.最大类间方差算法在运动检测系统中的应用[J].计算机应用,2011(1):260-262. |
| [11] | 王文成;徐建强;司书春.一种改进的重心法在光带中心提取中的应用[J].光电子·激光,2005(10):1239-1242. |
| [12] | 郭帅 .基于FPGA的高速图像处理研究[D].中国科学院光电技术研究所,2007. |
| [13] | 李轶博;李小兵;周娴.基于FPGA的快速中值滤波器设计与实现[J].液晶与显示,2010(2):292-296. |
| [14] | 樊志华;王春鸿.一种无需乘法器的光斑质心定位方法[J].光电工程,2010(12):17-24. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%