跳线联板是输电网中重要设备，其是否存在故障对输电网正常运行具有很大的影响。但由于现有的算法是对输电网中所有的故障用统一的方法进行识别，没有对各类故障输电设备进行专门的研究，导致故障跳线联板识别率低。为了高效识别红外视频图像中故障跳线联板，首先针对输电线的红外图像特征，采用改进的 OTSU 阈值分割图像对红外图像进行分割；其次，采用漫水法滤波分离各个连通域，运用形态学滤去小区域，填充大区域内的孔洞；最后，提取连通域的骨架，并从骨架图像中提取出 USFPF 特征，通过该特征识别的故障跳线联板。实验结果表明，识别故障跳线联板准确率为85．71％，漏检率为14．28％，误识别率为2．8％。该方法能够较好地识别故障跳线联板，具有较好的鲁棒性。
Jumper connecting plate is an important part of electricity supply network.Jumper connect-ing plate’s status has a significant impact on electricity supply network’s proper operation.However, all the existing algorithms identify the fault of electricity supply network with a unified approach,so we have no specific approach on various types of transmission equipment failure and it will result in low recognition rate of jumper connecting plate.In order to recognize the fault jumper connecting plate efficiently,we use improved OTSU method for infrared image segmentation and use flood fill method to separate each segmentation area.Secondly,we delete small areas and fill holes through dilation and hole filling algorithm,then get connected area’s skeleton by the skeleton extraction algorithm.Third-ly,we find Harris corner point in skeleton image,and calculate USFPF feature.Finally,through the slope value recognition we can discern jumper connecting plate’s fault.As a result,the successful rec-ognition rate for jumper connecting plate’s fault is 85.71%,the miss rate is 14.28%,and the mistake rate is 2.8%.Experimental results show that the method has good results.
参考文献
| [1] | 郭贤珊;李炜;蔡汉生.高压输电线路红外检测初探[J].高电压技术,1999(2):32-34. |
| [2] | 陈晓兵;马玉林;徐祖舰.无人飞机输电线路巡线技术探讨[J].南方电网技术,2008(6):59-61. |
| [3] | 彭晔 .基于红外热图像的架空输电线路故障检测软件开发[D].南京理工大学,2011. |
| [4] | 张文峰;彭向阳;陈锐民;陈驰;邓超怡;钱金菊;徐文学.基于无人机红外视频的输电线路发热缺陷智能诊断技术[J].电网技术,2014(5):1334-1338. |
| [5] | 刘健;解辰;蔺丽华.基于红外图像的电力变压器油位自动检测方法[J].高电压技术,2010(4):964-970. |
| [6] | 罗昳昀.高压输电线路设备红外诊断与检测技术分析[J].电子测试,2013(24):115-116. |
| [7] | 陈西广;董罡;王滨海;田兵;乔耀华.固定翼无人机巡检输电线路探讨[J].山东电力技术,2011(05):1-5,8. |
| [8] | 陈冬岚;刘京南;余玲玲.几种图像分割阈值选取方法的比较与研究[J].机械制造与自动化,2003(1):77-80. |
| [9] | 张正峰;马少飞;李玮.新的种子点区域填充算法[J].计算机工程与应用,2009(6):201-202,206. |
| [10] | 巨志勇;陈优广.一种新的基于链码的填充算法[J].计算机工程,2007(17):211-212,215. |
| [11] | 廖志武.2-D骨架提取算法研究进展[J].四川师范大学学报（自然科学版）,2009(05):676-688,封2. |
| [12] | 胡斯淼;任洪娥;于鸣;姜士辉;齐红.基于向量内积的新型骨架提取方法[J].液晶与显示,2015(5):844-850. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%