以聚醚N-210为原料,利用丙酮法合成了水性聚氨酯,使用热重分析技术考察了聚醚型水性聚氨酯分别在氮气条件和氧气条件下的热稳定性,并采用“无模式法”研究了在不同气氛氛围下的热分解动力学,同时计算了不同热分解阶段反应的活化能Ea、指前因子A等动力学参数.结果表明:合成的聚醚型水性聚氨酯的热分解过程在氮气条件和氧气条件下均为二阶段过程,第一阶段为硬段链的分解,第二阶段为软段链的分解,同时氧气的存在促进了水性聚氨酯主链上C-C和C-O键的断裂.
参考文献
[1] | 马伟,陆丽浓.环境友好型水性聚氨酯的研究进展[J].聚氨酯工业,2008(02):8-11. |
[2] | Vanesa Garcia-Pacios;Victor Costa;Manuel Colera .Affect of polydispersity on the properties of waterborne polyurethane dispersions based on polycarbonate polyol[J].International Journal of Adhesion & Adhesives,2010(6):456-465. |
[3] | 耿耀宗.现代水性涂料[M].南京:中国石化出版社,2003:47. |
[4] | 刘灿培,林金火,林艺松.HPAR/HDIT聚氨酯材料的热降解动力学[J].福建师范大学学报(自然科学版),2008(04):52-60. |
[5] | LEE H K;KO S W .Structure and thermal properties of polyether polyurethanes elastomers[J].Journal of Applied Polymer Science,1993,50(07):1269-1280. |
[6] | E. Covorcin Bajsic;V. Rek .Thermal stability of polyurethane Elastomers Before and After UV Irradiation[J].Journal of Applied Polymer Science,2001(5):864-873. |
[7] | 袁开军,江治,李疏芬,周允基.聚氨酯弹性体的热分解动力学研究[J].应用化学,2005(08):861-864. |
[8] | 李爱玲,熊金平,左禹,王成忠.聚氨酯胶粘剂的热分解动力学[J].物理化学学报,2007(10):1622-1626. |
[9] | Sow, C;Riedl, B;Blanchet, P .Kinetic studies of UV-waterborne nanocomposite formulations with nanoalumina and nanosilica[J].Progress in Organic Coatings: An International Review Journal,2010(2):188-194. |
[10] | Atul Sharma;T. Rajeswara Rao .Kinetics of pyrolysis of rice husk[J].Bioresource Technology: Biomass, Bioenergy, Biowastes, Conversion Technologies, Biotransformations, Production Technologies,1999(1):53-59. |
[11] | OZAWA T .A new method of analyzing thermogravimetric data[J].Bulletin of the Chemical Society of Japan,1965,38(11):1881-1886. |
[12] | FLYNN J H;WALL L A .A quick,direct method for the determination of activation energy from thermogravimetric data[J].Jounal of Polymer Science Part B,1966,4(05):323-328. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%