It has been more than ten years since the semi-solid processing (SSP) technique was put into commercial ap plications in the world. A lot of work on semi-solid metals (SSM) including their preparation, reheating and semi-solid forming has been done in China. In order to produce the high quality die-casting, a novel innovation that modifies the present machines based on the SSP technique was proposed. Semi-solid die-casting on modified casting machines can manufacture parts with more excellent quality than those produced by squeeze casting. It was found that the defects such as "elephant foot" and "periphery liquid metal loss" during reheating could be avoided through controlling the non-de ndritic structure of billets and optimizing the reheating process. The processing parameters and mold designs of semi-so lid die-casting are fairly different from those of liquid die-casting.
参考文献
| [1] | M C Flemings et al.[J].Materials Science and Engineering,1976(25):103. |
| [2] | S P Midson.Shef field,UK[A].,1996:251. |
| [3] | M Garat.Conf on Semi-Solid Processing of Alloys and Composites[A].Golden Colorado,USA,1998:199. |
| [4] | Weimin MAO et al.Acta Metall[J].Sinica(in Chinese),1999(35):9971. |
| [5] | GuojunLiu.Acta Metall[J].Sinica(in Chinese)35,1998(02):141. |
| [6] | Kui Zhang et al.Trans. Nonferrous Met. Soc[J].China(in Chinese),1999,9(09):353. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%