钛合金作为外科植入物用材料在临床上得到了越来越多的应用. 综述了钛合金作为外科植入物的优良性能及国内外在钛合金表面改性方面的发展和研究现状. 阐述了表面改性对改善钛合金的耐磨性, 耐蚀性和生物学性能方面的重要作用. 分析表明: 开发新型钛合金和寻求理想的表面改性工艺来获得高质量的涂层或将生物活性相添加到钛合金基体中制备成复合材料是提高钛合金生物学性能的有效途径.
参考文献
[1] | Donachie M .[J].Current Advances in Materials and Processes,1998,7:63. |
[2] | Meinert K.;Wolf GK. .Corrosion studies of stainless steel 316L, modified by ion beam techniques, under simulated physiological conditions[J].Surface & Coatings Technology,1998(1/3):1148-1156. |
[3] | Trigwell S.;Nelson KF.;Selvaduray G.;Hayden RD. .Effects of surface treatment on the surface chemistry of NiTi alloy for biomedical applications[J].Surface and Interface Analysis: SIA: An International Journal Devoted to the Development and Application of Techniques for the Analysis of Surfaces, Interfaces and Thin Films,1998(7):483-489. |
[4] | Brugnoni C.;Macchi G.;Muller R.;Parnisari E.;Stroosnijder MF.;Vinhas J.;Lanza F. .Evaluation of the wear resistance of ZrN coatings using thin layer activation[J].Surface & Coatings Technology,1998(1/3):23-26. |
[5] | Mudford L;Curtia R W;Water J D .[J].Journal of Dentistry,1997,25(05):415. |
[6] | 李佐臣.生物工程用钛合金的研究现状与进展[A].北京:中国材料研究学会,1994:3352. |
[7] | 张玉梅,郭天文,李佐臣.钛及钛合金在口腔科应用的研究方向[J].生物医学工程学杂志,2000(02):206-208,217. |
[8] | 刘敬肖,杨大智,王伟强,陈吉华,蔡英骥.表面改性在生物医用材料研究中的应用[J].材料研究学报,2000(03):225-233. |
[9] | 顾汉卿;徐国风.生物医学材料学[M].天津:天津科技翻译出版公司,1993 |
[10] | Hench L L .[J].Journal of the American Ceramic Society,1991,74(07):1487. |
[11] | Hulshoff G;Von K;Dijk J E et al.[J].Journal of Materials Science:Materials in Medicine,1996,7:603. |
[12] | 程逵;瓮文剑;葛曼珍 .生物陶瓷涂层[J].材料科学与工程,1998,16(03):8. |
[13] | 陈长春;孙康;吴人洁 .髋关节置换用股骨假体材料的研究与应用[J].材料导报,1998,12(06):1. |
[14] | 储成林;朱景川;尹钟大 .医用钛合金及其表面改性[J].材料科学与工艺,1998,6(02):40. |
[15] | 陈晓明,李世普.骨植入材料的表面特性与骨性结合[J].武汉工业大学学报,1995(04):132-135. |
[16] | Gross K A;Berndt C C.[J].Journal of Materials Science:Materials in Medicine,1995(06):219. |
[17] | Her H;Wie H;Jorgensen R B et al.[J].Journal of Biomedical Materials Research,1994,28:343. |
[18] | Witehead R Y;Lacefield W R;Lucas L C .[J].Journal of Biomedical Materials Research,1994,28:563. |
[19] | Shirkhanzadeh M .[J].Journal of Materials Science Letters,1991,10:1415. |
[20] | 黄立业,憨勇,徐可为.电化学沉积-水热合成法制备羟基磷灰石生物涂层的工艺研究[J].硅酸盐学报,1998(01):87-91. |
[21] | 崔福斋;冯庆玲.生物材料学[M].北京:科学出版社,1997 |
[22] | Bunker B C;Rieke P C;Tarasevich B J .[J].科学(上海),1994,264:48. |
[23] | Ruys A I;Kerdic J A;Sorrel C C .[J].Journal of Materials Science,1996,31:4347. |
[24] | 王迎军;赵子衷;宁成云 等.生物活性梯度涂层的显微结构与附着强度[J].材料研究学报,1999,13(01):103. |
[25] | Piran S;Eric J;Tobin L .[J].Surface and Coatings Technology,1996,83:175. |
[26] | Steve M;Harvey C .[J].Surface and Coatings Technology,1997,93:292. |
[27] | Tengvall P;Lundstrom I .Physico-chemical considerations of titanium as a biomaterial[J].Clinical Materials,1992,9:115. |
[28] | Perry A .Ion implantation of titanium alloys for biomaterial and other applications[J].Surface Engineering,1987,3:154. |
[29] | Dearnaley G;Goode P;Minter F .Ion-implantation and ion assisted coating of metals[J].真空,1986,36:807. |
[30] | Rostlund T;Thomsen P;Bjursten L et al.Difference in tissue response to nitrogen-ion-implanted titanium and c.p.titanium in the abdominal wall of the rat[J].Journal of Biomedical Materials Research,1990,24:847. |
[31] | Rie D;Vandenbulcke L;Herbin R et al.[J].Thin Solid Films,1995,270:177. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%