采用光学显微镜,扫描电镜(SEM),X射线衍射(XRD),透射电镜(TEM)和磨粒磨损试验,研究了8%Mo对等离子堆焊钴基合金组织结构和性能的影响.结果表明,堆焊合金层主要是由面心立方的γ(Co)和六方结构的M7C3构成,并且在钴基固溶体中存在着许多堆垛层错.8%Mo的加入,没有改变合金层的相结构,但其亚结构却发生了变化,堆垛层错消失,在钴基固溶体中出现了大量的位错.8%Mo的加入,不但可以细化钴基固溶体和共晶体组织,还可以提高合金层中富Cr碳化物相的相对含量,有助于提高合金层的硬度和耐磨性能.
参考文献
| [1] | Wang K L;Zhang Q B;Sun M L et al.Microstructural characteristics of laser clad coatings with rare earth metal elements[J].Journal of Materials Processing Technology,2003,139:448. |
| [2] | 蒋建敏,董娜,贺定勇,傅斌友,李现兵.电弧喷涂NiCrMo涂层耐蚀性能研究[J].稀有金属,2006(01):34-38. |
| [3] | 尚丽娟,才庆魁,刘常升,戚力.用稀土改性钴基合金激光熔覆层[J].稀有金属,2002(03):173-178. |
| [4] | Winkelmann Ralf .Investigations into the abrasive wear of powder plasma-arc surface welds[J].Schweissen & Schneiden,2001,53(12):E265. |
| [5] | Shinoda Takeshi;Kang Shin-Heung;Katoh Yoshihisa.Improvement of wear resistance of aluminum alloy by PTA surfacing process[A].,1998:1729. |
| [6] | d'Oliveira ASCM.;Vilar R.;Feder CG. .High temperature behaviour of plasma transferred arc and laser Co-based alloy coatings[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,2002(1/4):154-160. |
| [7] | Shin Jong-Choul;Doh Jung-Man;Yoon Jin-Kook et al.Effectof molybdenum on the microstructure and wear resistance of cobalt-base Stellite hardfacing alloys[J].Surface and Coatings Technology,2003,166:117. |
| [8] | 侯清宇,高甲生.Co-Cr-W系等离子弧堆焊合金层显微结构的研究[J].稀有金属材料与工程,2004(11):1199-1202. |
| [9] | De Molvan Outerloo J L;De Hosson J Th M .Microstructural features and mechanical properties of a cobalt-based laser coating[J].Acta Materialia,1997,45:1225. |
| [10] | 黄岩;黑祖昆 .钽离子注入奥氏体不锈钢引发亚结构的变化[J].核技术,1997,20(06):321. |
| [11] | 武晓雷;陈光南 .激光熔敷Fe-Cr-W-Ni-C合金的微观组织及其演化[J].金属学报,1998,34(10):1033. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%