利用丝网印刷技术制备Zr-V-Fe吸气剂薄膜.以Pb玻璃粉作为薄膜与基片的粘结剂,研究了三种不同退火温度下制备的Zr-V-Fe吸气剂薄膜的吸气性能,通过XRD,FESEM,EDS及吸气性能测试,分析讨论了薄膜的相组成、表面形貌和表面成分对吸气性能的影响.结果表明,退火温度变化会使薄膜表面Pb含量发生改变,从而引起吸气剂薄膜的吸气性能发生变化,在玻璃粉的熔点温度(350 ℃)进行退火,所得的薄膜具有更多清洁有效的表面,此时玻璃粉对薄膜的吸气性能影响最小,薄膜的吸气性能最佳.
参考文献
| [1] | Choi W B;Chung D S;Kang J H et al.Full sealed highbrightness carbon-nanotubes field-emission display[J].Applied Physics Letters,1999,75(20):3129. |
| [2] | Kim J M;Choi W B;Lee N S et al.Field emission from carbon nanotubes for displays[J].Diamond and Related Materials,2000,9(3-6):1184. |
| [3] | Figini A .Method for producing non-evaporable ternary gettering alloys[P].US 4269624,1981. |
| [4] | Manini P;Ferrario B .High-capacity getter pump[P].US 5320496,1994. |
| [5] | Benvenuti C;Chiggiato P;Cicoira F et al.Nonevaporable getter film for ultrahigh vacuum applications[J].JOURNAL OF VACUUM SCIENCE AND TECHNOLOGY,A16:148. |
| [6] | Caloi R M;Carretti C .Getters and gettering in plasma display panels[J].Journal of Vacuum Science and Technology,1991,A16 |
| [7] | Jin Yufen;Wang Zhenfeng;Zhao Lei et al.Zr/V/Fe thick film for vacuum packaging of MEMS[J].Journal of Micromechanics and Microengineering,2004,14:687. |
| [8] | Park D;Kim Y H;Lee J K et al.Synthesis of carbon nanotubes on metallic substrates by a sequential combination of PECVD and thermal CVD[J].CARBON,2003,41:1025. |
| [9] | Yu J;Zhang Q;Ahn J et al.Field emission from patterned carbon nanotube emitters produced by microwave plasma chemical vapor deposition[J].Diamond and Related Materials,2001,10:2157. |
| [10] | 尉秀英;秦光荣 等.宽程激活温度室温吸气剂吸气性能研究[J].稀有金属,1996,20(01):13. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%